You don't even need the "best 4k" cam.
The best security solution for most is several fixed cams covering the desired location. A 2mp will show...
There are a wide range of PTZ cameras that would almost meet your needs depending on your budget, from $200 to 2000.
I say almost because if you...
I'm sure it was the PTZ noise, just glad he stopped when he did..
Recorded this last night on a PTZ, surprised the night time auto tracking worked as well as it did. SD6AE240V-HNI
Yea it looks bad, they say it should last a couple months.. hopefully it will clear up..
Whitetail Deer Cutaneous Fibroma - Wikipedia
lol... :lmao: that's funny Andy... me too
Yep... that looks like more than enough..
I am sure you could if the PoE switch supports the power load for the cameras. PoE+(802.3at)
Power Consumption:13W,23W (IR on) each. Most switches...
I see you have the 8P- NVR. This changes the IP address of the cameras so you will not see it with the config tool.
This is why I always go with...
In Smart PSS you can not connect to the camera under the NVR list and set IVS for the camera.
You need to put the camera's IP address in the...
That's the only time you see the jutttering / freeze is in the one location when the IVS kicks in?
If the controls are working in manual mode with no issues, I would try to delete the rule and redraw it.
I did have some issues when I used a...
They look like the same specs, does it look like your NVR?
4216 can have 6TB
Dahua, rereleased the SD29204UE-GN as a starlight. It is a indoor PTZ with only 4x zoom but i'm sure the picture is nice....
Did you clear your browser's cache
I got my Ubiquiti airMax set up and everything is working but I can not seem to make out the settings very well. I did turn down the channel width...
Thanks for all the great suggestions..
Burial is not a option for this location as it is all blacktop. I am going to try the P2P nano beam to...
Would network extenders work for getting the uplink from a switch back to the router? I have power at the POE switch to the cameras but need a...
Whats the issue with the IVS? I have not seen any issue with mine but I do set it up in the camera not the NVR.
What ePOE NVR do you have? It must have more than 1 port... ?
No, it does not work like that. A PoE switch can't power another switch and then power more cameras. Generally 1 port - 1 camera.
Never used any of the TP's but have used a few of the BV-Tech switches, and they seem to hold up pretty good with no issues. I have used the 4...
You should also notice the missing icons on the bottom left of the browsers as well.
Android version just got a update, gDMSS plus to 4.40.001 maybe the i version will be imminent.. I have no troubles with either so can't say if...
Welcome human :wave:
Separate names with a comma.