Do you use that over the provided connectors? Similar to these:
IP Camera Connector Shield (8-pack)
Would be funny if the Dahua PFA130-E worked.
I found that on Youtube. The night quality on this cameras is better than the 4K Amcrest bullets that I'll slowly be replacing.
Not mine, but found on YT.
That looks good. New Jersey, my original home. :D
My little dog always chases any skunks he sees. I'm afraid he'll get sprayed one of these days.
Yikes. Well there goes that.
They all want you to buy the endurance versions. People have reported good luck in the dashcam forums with the A1 marked non-endurance Sandisk cards.
Both maybe? :D I remember needing to that when setting up a DS-2CD2443G0-IW last week.
How are you changing the password? Is it longer than 16...
From what I remember, there is no default passsword for these cameras. On your initial login, it will force you to set one.
For anyone wondering, the DS-1280ZJ-XS & CBXS mounts should work for this camera. I'm using this one from Amazon:...
I've been slowly replacing my indoor cams with Hikvision cubes, DS-2CD2432F-IW and DS-2CD2442FWD-IW models. Would like to try one the one Mike...
Haven't had to deal with that in over ten years. :D
Found one. If I want an equivalent FOV as 1/3" and 3.6mm, then 1/2" would need to be approximately 5mm.
That's disappointing that the specs are wrong.
According to the specs, the Hik should have a 78 degree FOV.
An IPC-HDW4231EM-ASE with a...
Strange problem you have. Is the switch able to provide enough power for your cameras?
It's possible. Have you tried a factory reset?
Looks like a CA plate so probably the latter.
Unplug the ethernet cable and see if you still receive responses from pings. Verify there aren't any weird auto maintenance settings configured.
I anything else on the network conflicting with the IP of your camera?
I ordered one to play with. Can't wait.
I see the images now. I would use silicone sealant to prevent water intrusion.
The images aren't visible.
Just Pi-hole for now
I haven't upgraded any of mine yet.
ETA: I checked the firmware on mine. The Hykamics are running V5.5.53 build 180730. The DS-2CD2432F-IW cams...
Separate names with a comma.