Search results

  1. A

    Review: EZVIZ DB1C

    Been running 5.0.0. for a while via Testflight, beta testing, went back to original after trouble with the app not receiving incoming call, hopefully they have resolved this in 5.0.1.
  2. A

    Review: EZVIZ DB1C

    Hi these are myn, i have a mesh too, TPlink one, got the Ezviz on the 5Ghz onto my Sky hub by itself and is fairly stable if not very stable, show low signal in Ezviz app but never seems to drop connection like it did on 2.4Ghz. The bottom one is the clone for the 24hr record.
  3. A

    Review: EZVIZ DB1C

    Yeah myn had QR code on front cover but no passcode, far East folk for ya.
  4. A

    Review: EZVIZ DB1C

    Not that i am aware off, there no Onvif yet, which would help a lot with things, keep sending them emails pestering for it, it does use IFTTT which through you could get BI to take snapshot, haven't gone into that side to deep yet.
  5. A

    Review: EZVIZ DB1C

    It's a bit different on DB1C the app seems to generate the QR code and you show it to the doorbell camera and sets up from there, at that point when you got QR on phone screen it also shows you the passcode/key.
  6. A

    Review: EZVIZ DB1C

    You have to go into the EZVIZ app on the about page, device qr code and press the eyelash thing to show password.
  7. A

    Review: EZVIZ DB1C

    Anybody have trouble if power goes to the doorbell, although it does reboot and connect back onto my network and BI can see it, the Ezviz app shows it as offline. And does anyone fancy trying to put the DB1 Hikvision onvif firmware onto there DB1C for a laugh, keep wondering myself, onvif would...
  8. A

    24/7 Recording

    Thanks @fenderman
  9. A

    24/7 Recording

    Yes got the search, i know i could just continuously record the sub-stream then on any motion, trigger the main stream to record, but seen as my main stream is trigger recording maybe 75% of the time, i wondered if i could maybe reverse this process to save HDD space, so rather than have an 100%...
  10. A

    24/7 Recording

    Hi, i have one of my 6mp Hikvison setup fairly sensitive to record which i am happy with, i would like to be able to record the sub-stream of the same camera whist the main stream is not triggered, i this possible and if so how. Thanks
  11. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Put a Sandisk Ultra in my one, after i tried 3 other good cards it was the only one that would initialise. Seems to me like must have high end super fast and legit cards in it.
  12. A

    EZVIZ DB1, just LEDs around camera, button does not light up.

    Yeah got to make sure get enough power to it, many people try to just power it, give it enough and a bit or you just have problems down the line.
  13. A

    EZVIZ DB1, just LEDs around camera, button does not light up.

    This should get you through a lot of problems, first being power supply. https://ipcamtalk.com/threads/new-rca-hsdb2a-3mp-doorbell-ip-camera.31601/page-101
  14. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    @Phontana Fair comments, i do understand your troubles, like with every tech product there is always an aspect that's not quiet there, or some some bit missing, ONVIF or something. Good luck with your search.
  15. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    @Phontana , why not just buy the Ezviz wireless chime or am i misunderstanding your problems.
  16. A

    Alexa Integration - Blue Iris 4

    So now you should have a virtual button in Alexa via Voice Monkey, go back into VM and generate a url, then copy that into the trigger alert page in BI, i think it's on alert send web request, then in Alexa app create a routine tell Alexa that when the VM button is pressed then show camera on...
  17. A

    Events: subscription 00002efd

    I have same problem with my Hikivision not sending Onvif, it's always nice when someone finds a solution and doesn't share.
  18. A

    Alexa Integration - Blue Iris 4

    Myn seems to be ok still, but don't use it often, but when i do it does, i use all cam feeds, just use 1 BI feed because it does not last long on screen, it buffers then stream stops, which make it good for a brief alert view, in Monocle i use all the sub-streams from the cams, Echo show only...
  19. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Have you tried a Ring Pro power kit, does same job.
  20. A

    Hotspot missing movement

    In zone A i can tell Bi to apply the size, contrast, distance parameters, but assume zone H dismisses all variables.
  21. A

    Hotspot missing movement

    i am using the hotspot zone H, on the understanding that any movement regardless of other settings in the motion detection, will trigger the camera, i have zone A setup for the usual stuff and masked areas, then H zones for areas were anything at all that moves triggers. It is triggering in...
  22. A

    Hotspot missing movement

    Yeah all sliders to minimum, contrast and size, i use simple anyway, not sure if Edge working ok anyway and yes about .5 make time, but like i say do these setting actually effect the so called "hotspot" zone, or is the "hotspot" zones once set ignore everything and do just like it think it...
  23. A

    Hotspot missing movement

    Hikvision 6m, i think i have confused you, i am talking about the "hotspot" zones in BI.
  24. A

    Hotspot missing movement

    Hi, i have some hotspots setup and i understand any motion at all would trigger, but it seems to be missing things, i there another setting i have missed that would diminish the hotspot setting. Cheers
  25. A

    New RCA HSDB2A 3MP Doorbell IP Camera

    Does anyone know if any of the Ezviz IFTTT "alarm type" triggers relate to the actual bell push, i know the "motion detection alarm" is the pir, just would like the actual bellpush. Also i have asked this before but cannot find info, how do i access the log in BC, got correct place but cannot...
  26. A

    IFTTT send trigger request to BI

    Is this syntax correct to trigger a camera within my network, BI IP:BI port/cam/(cam short name)/trigger webpage says ok, but not triggering, external check box ok Thanks
  27. A

    Alexa Integration - Blue Iris 4

    I use the sub stream were I can, still cannot get my Ezviz bell to show, even though works in vlc , have to go through BI for that one, the buffer thing could be useful regards only showing for a brief time on trigger, a useful flaw maybe. Think just alter some settings in Monocle to see if will...
  28. A

    Alexa Integration - Blue Iris 4

    A quick thought, could maybe turn volume down first in routine.
  29. A

    Alexa Integration - Blue Iris 4

    No me too, not the worst thing, glad it worked, do you use the cam feed or BI feed, if I use the BI one it doesn’t last long, starts to buffer then stops showing, also shame cam only show on one device, that’s a Echo thing though, could do parallel routines maybe. It’s getting there, some tweaks...
  30. A

    AAC codec not recording sound

    Have a look in the video tab for the DB1 in BI and try the "RTSP alternate decoder" in the audio dropdown. Andy
Top