Search results

I just read this... https://research.nccgroup.com/2020/12/18/domestic-iot-nightmares-smart-doorbells/ While the devices tested don't appear to be the same as the one I tested, the similarities are enough (mearitek / CloudEdge) to make me feel uncomfortable continuing to use it. I've changed...

After many frustrations with my AD110, which only works with Alexa show & firestick in the hours following a restart, but otherwise works OK... I tried a $49 2k wired doorbell cam from Amazon which promised to check all the boxes. There are three such doorbell cams there currently. By all...

I use a Dahua 4116 4k NVR to record multiple cams continuously, with motion enabled. Playing back multiple NVR recorded streams simultaneously and in sync works beautifully via Smart PSS on my desktop. (Smart PSS is playing from the NVR, there are no local recordings or PC-NVR in use.) Each...

Anyone have any experience with the Hikvision DS-HD1 doorbell cam? I'm tempted to try one and tired of fighting with my AD110 which only works with Alexa immediately following a restart. It seems feature-for-feature compatible and ups the ante with 5ghz wifi. My main asks are: powers from...

Yeah, no argument there about BI motion detection being better than what the cameras have built in. Rain and fog cause false motion alerts from the cameras all the time. I just wanted to start with BI as a drop-in replacement for everything my NVR is currently doing. When I couldn’t find a...

I’m using SH on an iPhone. Trying to talk by initiating talk from SH without any button press fails. I can live with that, because I can initiate talk if I need to from DMSS and AmcrestViewPro. Now that I’ve reset, skipped chime setup, and not adjusted the chime volume I can answer calls made...

Just used SH to change doorbell chime volume from Loud to Mute and now talk feature is not working again, and Echo Show reports it's not responding (it was working after the reset). Setting it back to Loud took multiple attempts because the app's slider bar would not respond. Setting it back...

Just did a reset and this time during setup I chose to skip the chime setup (was mechanical previously). On first test, bell press produced a call I could answer from smart home, but no chime inside and Alexa didn’t tell me anyone was at the door either. I’ll recheck the Alexa skill. If I can...

Thanks for the info. My NVR is also Dahua OEM so it’s using the private protocol to talk to the cam. I haven’t changed any encoding settings since the last factory reset but I did lose motion detection out of the clear blue sky one day and then restored it by reenabling it through the...

There’s an abundance of owners reporting “failed to talk” errors from SH and being unable to answer. Until recently, I was always able to answer calls by using the talk feature in two other apps instead of SmartHome. Only recently did the speaker volume begin to reset to zero on bell press...

Wow. You’re the first I’ve seen report no issues with answering a call. Are you running any NVR or VMS with it, or just using SmartHome and nothing else? Also... which firmware? Thanks.

@Bitslizer yes, I’ve tried resets. Perhaps it’s the firmware version I’m on. Does anyone’s AD110 actually allow a bell press to be answered? I’m under the impression that the talk feature fails in SmartHome regardless of app or firmware version. I thought I was ahead of the curve being able to...

Hi, all. I've discovered that the doorbell press results in the speaker volume set to 0. I'd like to automate resetting the speaker volume to 100 immediately following a press event. That would allow me to use DMSS or Amcrest View Pro to conduct a call with the doorbell soon after receiving...

I've just found this old thread by searching for an "Events: subscription" log entry issue that I'm experiencing in a newer version of Blue Iris, which does not have a "pull point subscription" checkbox (although I suspect it has just been renamed to "Get ONVIF Trigger Events" since this thread...

I've got them on a 50" display. My substreams are really low quality (for my NVR's sake) and are barely passable on a phone display. I'm checking out Blue Iris to see if I can do without them entirely. So far, the webservice provides a decent quality 1080p stream in a 4-cam group view and it...

Not using substreams - prefer to see the main stream in all my camera group views. All the cams set to higher than 2MP are anamorphic resized to 1080p. CPU is shown in the top right corner of the pic above. Megapixels per second is the calculated sum of: 9 cams at 2MP x 20 fps 2 cams at 4MP x...

The screen shot above reflects 13 POE cams (12 H.265, 1 H.264) pushing 682MP/s. I can get that down to 500MP/s by reducing resolution and framerate on 3 cams. All the "optimizing BI" steps have been employed (direct to disk, Intel+VPP decoding, etc.). I'm relying on the cams for motion...

Thanks. For some reason, anamorphic is grayed out when substream is enabled. Setting substream to none allows me to do what I want with the anamorphic setting for the main stream, but if I enable the substream again, then when I view the main stream, it's back to its default. As for the...

Trying out BI for the first time... My Amcrest cams’ two way audio feature has only ever worked for me in any application when the app is connected directly to the cam. Going through my NVR allows me to listen only. I was hoping BI would be more successful at passing the audio from my mic to...

@Hazza06 That sounds promising. Thanks for your help. I was going to ask if you would mind rebooting the camera that you've changed to ONVIF and see if the name you've given it remains after the reboot or if it gets changed back to IPC, but my impatience got the better of me... I was concerned...

Thanks for the info, but those are all Dahua cams. I’m referring to issues with other-branded cams that don’t support the private protocol and must use Onvif compatibility. Specifically, my cams primary protocol is XM protocol and they are based on the HI3516D-83H50N chipset. The Dahua Nvr...

noob questions... 1) Does this firmware still support motion detection from ONVIF cameras? I'm presently on version DH_NVR4XXX-4KS2_MultiLang_V4.001.0000000.1.R.200319 which was a downgrade from a higher V4 firmware under which the NVR did not recognize motion from any of my cams using the...

Dahua/Amcrest NV4116-HS issue... With the 2020 NVR firmwares, I find that the names given to my ONVIF cameras all revert back to the value of "IPC" after any single camera has been momentarily offline due to rebooting, or any time a camera is added or subtracted. The channel names within the...