Search results

  1. R

    Is there a way to adjust DMSS notification trigger between alerts?

    I'm curious as well. I have many clients with Dahua systems and I can't figure out how to limit the notifications. When they are triggered, it's non-stop alerts until the motion stops. I'm also wondering if there's a way to "snooze" the alerts on the app for specific amount of time? Sent from...
  2. R

    Review-OEM IPC-T3241-ZAS 2mp AI Lite series Varifocal

    I'm pretty sure this camera does not have a built-in speaker.
  3. R

    Review-OEM IPC-T3241-ZAS 2mp AI Lite series Varifocal

    I'll try the newer firmware as I haven't updated or used this camera in a few months. Thanks
  4. R

    Review-OEM IPC-T3241-ZAS 2mp AI Lite series Varifocal

    I am curious as well as to if the "AI" features have improved on this camera, as they were pretty poor when I originally tested this camera a few months back. Does human and vehicle detection work as expected? Thanks
  5. R

    ***PSA for those with a New DAHUA NVR with Built-in PoE switch

    If simplicity is what you want, you'll want to enable the p2p function on your NVR. Then it will use the similar easy "cloud" access that your used to. VPN would be the preferred secure way of doing it. Sent from my Lenovo YT3-850F using Tapatalk
  6. R

    Review-OEM IPC-T3241-ZAS 2mp AI Lite series Varifocal

    I finally had the time to test this camera out. I bought it specifically for the SMD features. I thought maybe I was doing something wrong, as there doesn't seem to be any difference from standard MD vs SMD. Has this really not been worked out yet on this camera?
  7. R

    Two cameras on single NVR port

    Don't get the nanoswitch unless you are using those specific unifi cameras, as they are 24v. Most all other cameras use 48v. Sent from my Lenovo YT3-850F using Tapatalk
  8. R

    Dahua NVR alarm out cycle

    I'm in the process of building an alert system that can be manually triggered via the dahua app (gdmss) through the NVR. The scenario would be: a customer is alerted that a person or vehicle is present, the customer pulls up the camera via app on phone, to verify, and then could trigger the...
  9. R

    2 Problems with HDW2231 camera.

    Could just be a cabling/poe issue. Sent from my Moto G (5) Plus using Tapatalk
  10. R

    UI3 on Fire TV stick shutting off?

    Personally, I would/do leave the TV on 24/7. Some would argue there's less "wear and tear" . I've been running 4 32"-42" LCD monitors non-stop for a few years and have had no failures. Sent from my Lenovo YT3-850F using Tapatalk
  11. R

    Second viewing station for under $50!

    You need an SD card to run the OS on the pi. I'm sure you could get away with the minimum size. As far as RAM goes I'm not sure how much is actually needed, but it will run best on pi 3 or above. I have one running on a pie 2b which seems to do okay. Sent from my Moto G (5) Plus using Tapatalk
  12. R

    Anybody tried getting rid of the plugs?

    I wish they made a POE only version of these cameras. The 12v plug has always been a sore for me...does anyone even use that plug anymore? Sent from my Lenovo YT3-850F using Tapatalk
  13. R

    Big Discount

    Sorry, I meant third line from the bottom. Sent from my Moto G (5) Plus using Tapatalk
  14. R

    Big Discount

    Read the 3rd line from Andy's post
  15. R

    web interface works withot NACL plugin with new firmware

    Is there a newer NVR firmware that does the same thing, eliminating the plugin for chrome? Sent from my Moto G (5) Plus using Tapatalk
  16. R

    Nanostation M5 with Hikvision Cameras

    For your Ubiquiti radio question, 3 nanostations in STA mode (one @ each camera), and 1 nanostation in AP mode @ the building. This will bridge everything together, assuming you have everything configured right and have power figured out. FYI, if you power the cameras separately (not POE)...
  17. R

    Dahua NVR - rtsp stream for split view (multi view)

    Thanks for all the suggestions. I am using VLC, and I even tried it on my main computer to make sure it wasn't some restriction via the pi, but had the same problem. I may have to look into some other methods as BP suggested. Sent from my Moto G (5) Plus using Tapatalk
  18. R

    Dahua NVR - rtsp stream for split view (multi view)

    Nothing. I've tried 0, 0-0, and 1-17, which gives me a single camera view on 1-6 (6 cameras connected at the moment) Sent from my Moto G (5) Plus using Tapatalk
  19. R

    Dahua NVR - rtsp stream for split view (multi view)

    Does anyone know the answer to the original question? I'm trying to stream to my pi, and figured out how to stream the RTSP individual camera feeds, but want to stream the multiview from the nvr. Thanks.
  20. R

    PoE Switch Options

    I'm sure the OP has already found a switch, but for others looking for a good quality managed switch, I found that the netonix switches are far superior to the ubiquiti and around the same cost. The only thing they don't have that ubiquiti has is the 24 volt poe, so might be an issue for some if...
  21. R

    Multiple POE switches vs long wires

    I run 6 Poe switches in different parts of the house. Way easier to manage than trying to get all wires to one location. You can also run a wireless bridge between different buildings and use multiple Poe switches at each end. Sent from my Lenovo YT3-850F using Tapatalk
  22. R

    Bridge for NVR Video over WiFi?

    Yes use Ubiquity M5's not M2's. M5's have way more channel options and will work well even with poor line of sight at that distance.
  23. R

    Dahua NVR multiview url?

    I've searched, but can't seem to find what I'm looking for. I'm trying to set up the rpisurv and am looking for the correct url for the multiview on my NVR? I am able to get individual channel video on VLC using the rtsp://admin:admin@10.7.6.67:554/cam/realmonitor?channel=1&subtype=1...
  24. R

    Intel NUC5i7RYH for residential use

    If physical space is an issue, the NUC is a good choice and will run a few cameras easy enough with the right configuration as fenderman advised. I went this route for a couple of customers, only to find that I could build a faster desktop for less $$$, and with way more options. You will be...
  25. R

    Second viewing station for under $50!

    FYI Pi 2 b+ and Pi 3 working great in Kiosk mode with UI3 using this tutorial Raspberry Pi Kiosk using Chromium . My Pi's will boot automatically to UI3 with no user interaction needed. The tutorial is fairly up to date as of now...a few days ago step 10 had some old info...
  26. R

    SD49225T-HN LiveCam via Youtube

    We put up an SD49225T-HN, testing it as a LiveCam via Youtube. I'm pretty impressed with it's overall performance. TLF WiFi & Security Camera if anyone is interested. I've been tweaking the night time feed settings, and think I've got it dialed in pretty good without using IR (best...
  27. R

    Review of KKMOON 1080P Fisheye camera

    I bought a different brand, seems identical, yesterday. Took me a couple hours to figure out how to get them running. You can access all of the camera settings and languages once you install the active x control software that's on the disk and use internet explorer. It was a pain on windows 10...
Top