Search results

  1. B

    Mystery Symbol (Icon)

    That is the "Run maintainance" icon for the Database. Right click on the clips and choose Database at the bottom, then choose "Run Maintanace" and the icon will appear.
  2. B

    4.7.5 - May 23, 2018

    Yes I do. I disabled the Reolinks and everything works fine. Update: Unchecking "Limit decoding unless required" on the Reolinks solved my issue.
  3. B

    4.7.5 - May 23, 2018

    I'm having the same crashing issue on two computers. One uses harware acceleration one does not. I've contacted support and hope to hear back soon.
  4. B

    Blue Iris URLs for external streams

    I had the same problem with authentication. I had to setup another user other than "admin" that had administrative rights, and use that name for authentication.
  5. B

    Blue Iris URLs for external streams

    Try /admin?camera=x&preset=n It is much easier. When using the pos command the positions 0-6 are used for move up,dn left, right, ect. So to got to preset 1 you would use 7, 8 for preset 2.
  6. B

    Trigger PTZ preset through BI web interface

    /admin?camera=x&preset=x
  7. B

    Crash!!

    Hit and run last night.
  8. B

    trigger camera with http command

    Try http://10.0.0.124:8080/admin?camera=Dahua_Turret&trigger&user=user&pw=password I have to have the port number in the command for mine to work. Also make sure Duhua_Turret is the SHORT camera name.
  9. B

    Events: reguest 8000ffff

    I had the same problem. I had to uncheck "Get events with PullPointSubscription". It is in the Video/Network page in camera properties. Go to the Video tab and then "Configure" I'm not sure why this just started with the latest update. Waiting on a response from Support.
  10. B

    HTTP URL Triggers

    No recent changes that I know of.
  11. B

    Control PTZ Presets with another Cameras Trigger

    The delays do cause a problem. You might be able to use Zone Crossing in the Motion Setting and Object Detection to keep the camera from moving back, but that would end up getting complicated and involve more cloned cameras. Under Alerts menu there is a Disarm time delay but I'm not sure if that...
  12. B

    Control PTZ Presets with another Cameras Trigger

    The way I handled the problems that you are having, was to control it with a Veraplus controller and PIR motion sensors. The PIR sensors do not seem to react as bad to the camera IRs. This may not work in your case though. You can play with the Min. duration (Make time) on the camera motion...
  13. B

    HTTP URL Triggers

    There were some changes. I had to add "&user=[your username]&pw=[your password] to each command line.
  14. B

    Control PTZ Presets with another Cameras Trigger

    There are a couple of problems tho. The Huisun PTZ 10x is not fast enough to track fast moving objects like cars. You can not use multiple zones to make multiple actions. I use cloned cameras for different zones. I also use the zone crossing feature to anticipate the direction of the object I'm...
  15. B

    Control PTZ Presets with another Cameras Trigger

    This can be done in Blue Iris. On the camera that is going to send the PTZ from on record, go to Camera properties and Alerts. Under Ations check "Request from a web service" Configure "When triggered" like this. 127.0.0.1:8021/admin?camera=BK2&preset=5 Replace 8021 with your actual web server...
  16. B

    Change clips/archiving folder names

    Yes you can, but when I went to make sure, it did not work for me at first. It seems that you have to triple click on the folder name to change it. Strange!
  17. B

    New HTTP Cammand

    Thanks bp2008 I have never worked with JSON so I would not know where to start. The web requests work great for PTZ and triggering!
  18. B

    New HTTP Cammand

    For those who use a home automation system like I do (Vera) to automate BI, there is a new HTTP command to toggle motion triggering. Available in the latest update. /admin?camera=cam1&motion=0 or 1
  19. B

    4.3.0.8 Crashes During Clip Replay

    Just discovered a temporary work around for this problem. At least it worked for me. Open the .bvr file from windows File explorer. When it plays back in Blue Iris you can uncheck the "Test run video through motion detector". I can now play videos in BI as long as I don't check the test option...
  20. B

    4.3.0 - February 23, 2016

    This is what I have found so far. I hope it will help those that are confused with the new motion settings. 1. 4.3.0.2 has solved the "running as a service" problem for me as far as saving masks. 2. Masks used to be exclude areas and is now include areas. Green areas are motion detection areas...
  21. B

    Timelapse question

    Thanks, fenderman I should have been more specific. If I use any rate above 1 fps it goes to realtime playback and not timelapse playback(per the manual). I need it to playback timelapse. I guess I could use the playback speed to get the same effect but I have 4 other cams recording at 1fps...
  22. B

    Timelapse question

    I am trying to record a timelapse at 3 FPS. According to the manual: "If you enable the Use alt framerate option, you can record single frames on a periodic basis. When you record video without audio at a framerate of less than 2fps, the playback framerate is set to 2fps. The effect is a...
  23. B

    PSA - Serious issue in 4.2.6.6 - Camera signal lost - update to 4.2.6.7

    fenderman, Your contributions to Blue Iris and this forum are too well known for you to be wasting your time with this kind of crap. Please let this go and continue with your very proffesional help we all know and appreciate. You are better than this and everyone with any real appreciation for...
  24. B

    Triggering BI camera to record with HTTP commands, works with VERA

    Here is the list I have. /image/{cam-short-name}?q=50&s=80 A single JPEG image from a specific camera, with optional quality (q) and scale (s) parameters. Quality is a percentage from 1-100, and scale may be any number >0. /image/{cam-short-name}?h=100 You may also specify a specific height...
  25. B

    Triggering BI camera to record with HTTP commands, works with VERA

    luup.inet.wget("192.168.1.134:8021/cam/BK3/pos=8") BK3 is the short cam name. Mine is local only so I don't worry about the name and password.
  26. B

    Triggering BI camera to record with HTTP commands, works with VERA

    I use HTTP commands for BI PTZ and it works great! /cam/{cam-short-name}?pos=x Performs a PTZ command on the specified camera, where x= 0=left, 1=right, 2=up, 3=down, 4=home, 5=zoom in, 6=zoom out, 7+1 = Preset 1, 7+2 = Preset 2, etc
  27. B

    Purchase a license Problem

    I went to https://www.mycommerce.com/order-search and was able to find my order! From there you can find your license codes. Once I entered my codes I was able to update tp 4.0.0.6 and a lot of my problems were solved!
  28. B

    Purchase a license Problem

    I am having the same problem. Emailed support, but no answer yet.
Top