Search results

  1. R

    IPC-T5442T-ZE IPC-T5442TM-AS SMD 3.0 Smart IR Latest New Firmware From EmpireTech

    did behave differently with the different browsers?
  2. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Your currently static setting your NIC and cams correct? I get the impression you are, if so a unmanaged switch should work just fine.
  3. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Basic answer to your question is yes the data trying to get to your pc would be aggregated out that port, but in your case it can not all get out that port at the same time. So switches routes all the traffic it sees based on either IP/MAC address from all your cameras to one of your PC NICS...
  4. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Might also be the options for retriggers. I need to fine tune my retrigging settings. I been lazy this last week I need to devote a full night of going through all my alerts to tweak the motion zones, and triggers and the timing of the retriggers I am also behind several version of BI, which...
  5. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Maybe this will help you figure out your bandwidth issues needs https://www.cctvcalculator.net/en/calculations/bandwidth-calculator/ I get what your doing, your trying to offload some of the workload form the trendnet to the outbuilding. I am assuming your intending to buy a another switch for...
  6. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    No. The end to end connection between any one point depends on the links involved. so if you have a 100MB switch between the cams and the the main 1GB switch the link from cam to 1gb switch is 100mb. think of the link speed as your pipe diameter. your speed between points is always at the...
  7. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    ok but I thought BI+Deepstack only worked with BI motion triggers and ignores ONVIF triggers. I am still fine tuning my BI triggers. Usually my CAMS see the motion first send onvif trigger but BI does nothing when BI see the motion then I see the deepastack check. Anyways I am wondering if...
  8. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Why are you processing so many? Is it possible your overtasking?
  9. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Your confusing me with the offloading. I don't fully understand your hardware configuration maybe draw it out. So I was re-reading your post on the previous page so your using three NICs, built-in nic for internet, and 2 of your additional 4 ports connected to two 16 port poe switches then...
  10. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Even if they are giga, your are probably running in auto and it may be auto-negotiating to the 100mbs of the switch. At first I thought you meant your were using link aggravation was going to suggest you double check your aggregation settings. you might be able to set there speed under the...
  11. R

    Help with deepstack gpu for windows

    Going to try lowering my confidence levels, currently at 50%. Also wondering if I need to lower the movement threshold in BI currently using 1 sec. I do continuous recording so preview doe snot help out.
  12. R

    Help with deepstack gpu for windows

    I running windows server 2016.. GPU does not appear in the performance info. That's Win10 and 2019 only. I am using gpu-z to monitor it . I think Need to find a better GPU though, when deepstack check things it mostly avg 250ms sometime up to 500ms. But I can not view deepstack-gpu ui and see...
  13. R

    Help with deepstack gpu for windows

    Well I do see Deepstack comments in my iris logs now after adjusting my frame rates and hot zones in blue iris. But I got some more tweaking I need to do with triggers. I may have to use the option to send notice regardless, but I know my cams was giving me fits with the winds, I do use the IVS...
  14. R

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903

    What's the current stable version of the firmware for these cameras? I am running V2.800.0000000.20.R, Build Date: 2020-09-03 with ONVIF Version19.12(V2.7.0.907196). The first post was the same as the version I am on. I thought there was a new official release.
  15. R

    Help with deepstack gpu for windows

    same issue, but using a gt1030, According to the cuda stuff the 1030 is supported but most think its waste of time. I am curious as the gpu just sits there idle otherwise. I thought I saw the gtx 6xx series in the cuda docs.
  16. R

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    OK couple of questions were are these logs you guys are reviewing for deepstack? I have not found any. I running the GPU version of Deepstack. I also don't see anything in the deeptstack window when I open the shortcut on my desktop. I did stop DS in BI and start it using PS with all three...
  17. R

    Jumped from BI 5343 to 5364 and tonight to 5365 My SMS alerts have stopped on most of my cams but BI shows the alerts

    Yep that did it. I was looking in the wrong spot for the inspect option and Almost muck up my whole setup, but what are backups for.
  18. R

    Jumped from BI 5343 to 5364 and tonight to 5365 My SMS alerts have stopped on most of my cams but BI shows the alerts

    We will see, I think I was looking in the wrong spot to do the inspect.
  19. R

    Jumped from BI 5343 to 5364 and tonight to 5365 My SMS alerts have stopped on most of my cams but BI shows the alerts

    So Since I jumped up from 5343. all but my front door alerts have stopped sending a SMS. BI shows the cams ONVIF alerts are occurring just not sending out the SMS except for the one. SO I know my SMS setup is working. Did I miss something. Cam setups and Alert setups all appeared to be...
  20. R

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903

    You just need to refresh your screen if you think it is stuck. in chrome shift+f5 forces a complete reload of the page and return a load error if the cam is not yet done rebooting. .
  21. R

    BI Video Network IP Camera Config settings for the 5442 and motion sensor questions

    OK So I think I finally have it all resolved. My triggers are not going nuts and I the ROI issue was AIO in the BI video tab. Now I will observe over the next several days but I think now its not in hyperdrive with motion triggers. Actually turned SMD off and enabled video detection in the...
  22. R

    BI Video Network IP Camera Config settings for the 5442 and motion sensor questions

    So I forgot to turn SMD back on in the Camera GUI.
  23. R

    BI Video Network IP Camera Config settings for the 5442 and motion sensor questions

    Hm I manage to break the alerts. All I did was disable BI motion and zones.
  24. R

    BI Video Network IP Camera Config settings for the 5442 and motion sensor questions

    So I have been working on my camera settings and I noticed under the network config that BI sees my 5442 as a Generic/ONVIF and the model option it choose was the RTSP H.264/h.265/MJPG/MPEG4. This is the window you open under the BI "Camera Settings>Video Tab>Config Button" So now I assume...
  25. R

    Would Andy’s New Model IPC-T5442T-ZE 4MP Starlight IR Vari-focal

    Lol forgot about that turret requirement.
  26. R

    Would Andy’s New Model IPC-T5442T-ZE 4MP Starlight IR Vari-focal

    If you want don't want to digital zoom, then I would I would probably go with the 8-32 if I could have convinced my wife on the need for the extra cost, I think i would have gotten that one for my mailbox and used the this one out back to view one of the sides of the house from the shed. I can...
  27. R

    Need input on camera options for this doorway

    Final positions of my cameras, I have 4 total, a varifocal, 2.8, 3.4, and 6, these are all 5442s. . I put a ssd card in the 3 critical ones, but I am currently doing 24/7 continuous recording with BlueIris, in daytime mode. Default settings except for the zoom on the varifocal. And using the...
  28. R

    Dahua IPC-HDW5442T-ZE 4MP Varifocal Turret - Night Perfomance testing

    What's your recording setup like: NVR/BI? what about retention schedule and recording drive space? Just curious, as I was planning on relaying on the motion sensors to trigger recording, but if I can not get sensitive right I just might switch to continuous. Right now I am using BI, 4 cams...
Top