Search results

  1. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    @wv1973 Thanks for your feedback. Great that it helped you out. Do you know that it is possible to install a onvif supported firmware on your DB1? With the onvif support it is very simple to add the doorbell to your Synology.
  2. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Relay: Finder 22.21.8.024.4000 (I've attached the specsheet with this post) 433mhz transmitter: kaku ACDB-7000B . This transmitter is normally used if you have a wired doorbell connected to a chime and you want to make it wireless.
  3. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    I'm one of the members who uses a relay instead of a mechanical or digital chime. I'm using a 24v relay because of the 24v trafo. When the Ezviz DB1 button is pressed it switches the relay. And the relay triggers a 433mhz transmitter. That signal is picked up by the home automation system, i'm...
  4. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hi Jack, i'm from Europe to (Netherlands). I'm also using a Finder Relay. See post #401 . But it is a 24v version. Works great. But i use it in combination with a 24v trafo.
  5. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Man you are the best . That snapshot url works great in my Domoticz setup. Now i do not have to use my script anymore to capture a snapshot from the rtsp stream.
  6. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    I've only used the Ezviz app for the initial installation. After that i removed the doorbell from the app and uninstalled it. But it's still trying to connect to the Tencent cloud. I'm also using an openvpn tunnel to my home to manage the cam using the Synology DS Cam app. That works great.
  7. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Today i was checking the firewall log of my Pfsense and i noticed that every 10 minutes the Ezviz DB1 is trying to connect to the Tencent Cloud Computing: 49.51.168.224:6002 and sometimes on 49.51.160.53:6002. This behaviour is the same for the Ezviz firmware as for the LaView Firmware. Is...
  8. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Good to know it is normal behaviour. But is it normal that it shows the old Ezviz firmware version and not the new LaView version?
  9. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Allright guys. I just flashed this firmware file on my Ezviz DB1 using the Hik Batch config tool. LaView Halo One http://usdownload.ezvizlife.com/device/LV-PDB1630-U/2.0/LV-PDB1630-U.dav The logo changed from Ezviz to RCA i don't kow if thats correct? But everything worked fine. Then i added...
  10. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    I was able (with some tweaks) to add my Ezviz DB1 to Synology Surveillance Station without ONVIF. I'm running a Virtual Synology DS918+ on my ESXi environment. It works great. But i hope ONVIF will ever be available. So adding it to SS will be much more simple.
  11. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    I'm using a script to capture an image from the RTSP stream. I'm using Domoticz on a Linux server. So when the Ezviz DB1 button is pressed my zwave sirene is triggered and the script captures an image and send it to Pushover. BTW i hope that the Ezviz firmware will also contain the ONVIF option...
  12. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    I'm running the latest firmware. The same version you mention. For specific settings i have to install the EZVIZ app again. I don't use the app. I use it only for the initial configuration.
  13. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Below you can see how i have wired my Ezviz DB1 with all the components. Because i'm not an technical engineer it just a simple drawing :) The KaKu is the 433mhz doorbell transmitter.
  14. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    So instead of a chime i'm using a 24v relay switch. So when the doorbell is pressed and the relay switches and the circuit is closed the 433mhz transmitter sends a signal to my receiver (rfxcom). With that received signal i can do whatever i want with it. For now i'm using an event that triggers...
  15. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    I'm also using surveillance station on the Synology. Works great. If you are using a domotica system there are other ways to receive doorbell press notification. I have connected my Ezviz to a 433mhz transmitter and i'm using Pushover for the notifications. I do not use the Ezviz app at all.
  16. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Yes indeed the chime is very loud and annoying. Because i do not use the intercom functionality i have put a peace of tape over the speaker. That works fine for me.
  17. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    You cannot add the Ezviz DB1 camera to your Synology using the normal way. But you must connect to your Synology using SSH. 1) First open a SSH connection to your Synology. 2) Create a new file for example : Ezviz-DB1.conf It should be placed in...
  18. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Today i finally figured it out how to add the Ezviz-DB1 in the Surveillance Station from Synology. So now i do not need the app anymore. For push notifications i receive snapshots (triggered with my domotica system) from pushover and for motion detection i'm using Surveillance Station. For who...
  19. K

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hello guys, I am a new member of the forum. I have already introduced myself in the right topic. A view days ago i bought myself the Ezviz DB1 doorbell cam. Before i'm going to install the doorbell on its permanent location i'm testing all the features. I'm going to use the DB1 without a...
  20. K

    Hello from The Netherlands

    Hello guys, my name is Bryan i'm from the Netherlands. I have already found quite some useful information on this forum. One of my first projects will be the installation of the Ezviz DB1 doorbell cam and integrate it with my ho domotica system. I already appreciate all the help I will get.
Top