Search results

  1. G

    Overcome limit 256ch on SmartPSS

    thanks! So if I got it right, to overcome the limit we can: 1) open different virtual machines and install for each one SmartPSS 2) Install SmartPSS different times using kind of different names, and run them simultaniusly 3) Export the config and import another one, to see other devices. In my...
  2. G

    Overcome limit 256ch on SmartPSS

    Thank you mates for all replies, I would you know that my goal is not to see 500 channels at once on one big screen, but the ability to see every single place, separately, for example 16 channels. The limitation od SmartPSS is that when it connects to XVRs, exceeeding the 256 result on XVR...
  3. G

    Overcome limit 256ch on SmartPSS

    Thanks for posting, DSS Pro cost a lot of money, especially for more than 256ch, I'm sorry to say that Dahua makes this choice without thinking on average users. my client has already spent lot of money for different systems and it's in his rights to see them in his PC, whouth need to pay more...
  4. G

    Video Wall is not working on SmartPSS

    Thanks for reply, have I undestood well? Video Wall works only with streams coming from NVD0105DH-4K?
  5. G

    Overcome limit 256ch on SmartPSS

    Hi! Has anybody known if there is a way to overcome it? Maybe pay extra? But Seams Dahua doesn't support/sell more SmartPSS. Prices for DSS are unbelievable high, make it no sense. A client who bough 1000 cameras from Dahua has spent enough money, and has fully the right to see them on his...
  6. G

    Video Wall is not working on SmartPSS

    Anyone here have tested sucessfully the Video wall? Thanks
  7. G

    Video Wall is not working on SmartPSS

    Hi, thanks for replying, I have Windows 10 64 bit, all prerequisite are satisfied. The program is full worjing except for video wall. In the main guide there are cameras visible in the menu, ready to be placed into the video wall, as you can see from my picture I have no choice. Do you have the...
  8. G

    Video Wall is not working on SmartPSS

    Hi, I've also tried older versions and on different servers, there is nothoing to do to add cameras on Video Wall setup, it displays Default Group and it's not populated by cameras. Do you have the same problem? Does Dahua disabled such functionality? Thanks for answers
  9. G

    Dahua NVRs channel zero

    you may try to open it by rtsp rtsp:/login: password@ip:554/cam/realmonitor?channel=0&subtype=0
  10. G

    Dahua NVR 0channel-0 multi channel preview URL?

    Hi, I've just tried it and it works, I've used rtsp:/login: password@ip:554/cam/realmonitor?channel=0&subtype=0 You need to enable channel 0, in the new XVR is under display settings, no idea for others, be sure this feature exist
  11. G

    Hikvision DVR: How access on camera's OSD menu from PTZ control?

    Hikvision said that my cameras (DS-T203 and DS-T201) don't supoort OSD :facepalm: simply amazing, recent cameras 2mpx without this option, this is another reason for me to keep not buying Hikvision for my clients (Dahua doesn't have such problems)
  12. G

    Hikvision DVR: How access on camera's OSD menu from PTZ control?

    Thank you, I've searched a couple of hours to figure out myself and quickly solve the problem. I couldn't find a solution. Everybody talking about this preset95.. but I've also adviced that there are raeally a lot of protocols available on DVR. By default was UTC, fixed speed, which doesn't...
  13. G

    Hikvision DVR: How access on camera's OSD menu from PTZ control?

    Calling preset 94 went to a lack of video, and a reset of camera. I feel this presets may be dangerous! If I'll loose a camera I?m now 1000km away..
  14. G

    Hikvision DVR: How access on camera's OSD menu from PTZ control?

    Thank you for your reply, can you please explain me better? I've clicked on preset 95, doble click, selected and press all buttons, on both DVRs, nothing is happened. What exact sequence of clicks I have to do? Thank you!
  15. G

    Hikvision DVR: How access on camera's OSD menu from PTZ control?

    Hi, I need to configure the 2mpx TVI cameras, exposure and so on, I hnow the camera has thei menu because i can see it for a whle after the boot, but I can't find any key on the web interface menu to open it up. On Dahua rcorders is almost easy, just press the Iris button will access it and...
  16. G

    Cannot stop the boot process with ctrl+u

    thank you! I've wrote a guide how I've solved the problem, here: https://ipcamtalk.com/threads/hikvision-clearing-passwords-and-or-loading-firmware-via-ttl-serial.28049/post-556441
  17. G

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    Hi, glad to tell everyone here that I suceed. Honestly things were far from expected and I've lost lot of time, so here is the report of my experience I REALLY HOPE I CAN SAVE SOMEONE ELSE TIME, as I hoped to find a post like this to proceed without loosing that much.. My method is valid for...
  18. G

    Hikvision DVR (216Q) ctrl+q: autoboot goes to 1 then to 0

    I've solved it, it was need to press ctrl+u and NOT ctrl+q as written when you power it on :facepalm: Hikvision has really several mistakes all around. For more info read here: https://ipcamtalk.com/threads/hikvision-clearing-passwords-and-or-loading-firmware-via-ttl-serial.28049/post-556441
  19. G

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    I?ve managed to interrupt boot with ctrl+u but it's not responsive to any command: U-Boot 2010.06-svn (Jun 09 2017 - 17:35:53)[V1.4.5] Hit ctrl+u to stop autoboot: 0 HKVS $ printenv HKVS $ setenv ipaddr 192.168.1.200 HKVS $ setenv serverip 192.168.1.232 HKVS $ help HKVS $ root HKVS $ su HKVS...
  20. G

    Cannot stop the boot process with ctrl+u

    U-Boot 2010.06-svn (Jun 09 2017 - 17:35:53)[V1.4.5] Hit ctrl+u to stop autoboot: 0 HKVS $ printenv HKVS $ setenv ipaddr 192.168.1.200 HKVS $ setenv serverip 192.168.1.232 HKVS $ help HKVS $ root HKVS $ su HKVS $ update HKVS $ seems nothing is working here, I sniffed ethernet and nothing is...
  21. G

    Cannot stop the boot process with ctrl+u

    thanks for help, yes it does, in the end of full boot i can type help and I've the list of commands. All is ok. I've managed to interrupt boot with ctrl+u, but I've a HKVS $ and anything I type is not considered (i see echo, but the command is ignored). What to do now?
  22. G

    Hikvision DVR (216Q) ctrl+q: autoboot goes to 1 then to 0

    Hi mates, I?ve a trouble here and can't figure out how to overcome it. ALl connections are fine, I've echo from DVR if I leave it complete the kernel boot, but it doesn't interrupt boot loader. I've tried putty and Realterm to be sure it sends really a ctrl+q.. the the stop autoboot: goes for...
  23. G

    Cannot stop the boot process with ctrl+u

    I have the same problem, can't stop uboot pressing ctrl+q, it goes 1 for awhile and returns to 0, I'm sure all is connected perfectly, what can I do? there is anther break instruction? the system loads kernel, etc, I have a # prompt after, there is anything there I can do to flash? Actually I...
  24. G

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    I can't stop my dvr from booting the kernel, keep pressing ctrl+q or ctrl+Q before power the dvr on, the ttl 232 is working, set to 3,3 volt, if I loop rx-tx I can see the echo on terminal so it's transmitting. I see also the tx led working.. I've checked the physical connection and the usb 232...
  25. G

    Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

    Hi mates, I've a DS-H216Q that was running (if I don't remember wrong) an old 2017 version 3.1, I've updated it to the latest DS-H216Q_V4.21.100_200508 and now I can't login more, it doesn't give any result at the web logon page, even if I use wrong password. The Hikvision service for password...
Top