Search results

  1. AlbertoIt

    PoE Switch vs PoE NVR

    I will try to compare Poe nvr and nvr+Poe switch. Poe nvr: +It is a little easier to setup (almost plugnplay) +If you think to add a ups battery you need just one for the nvr. less flexible placement (this depends on how many cameras you have) because all cameras cable must be connected to...
  2. AlbertoIt

    How do I get streams to display on my doorbell monitor?

    Do you mean how to find out the cameras IP address? Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  3. AlbertoIt

    VTNS1060A

    Question answered in this thread: Need help with VTO2202F-P Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  4. AlbertoIt

    Need help with VTO2202F-P

    In fact that's the problem. At the end I found this draw and that's exactly what I did. Thanks catcamstar, you're always helpful. By the way, the vto2202f has a much better camera than the older vto's! Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  5. AlbertoIt

    VTNS1060A

    Hello guys, in my intercom system I have the vtns1060a switch. Now i'm going to replace my broken vto2000a with a vto2202f-p. The doubt is can I connect the new vto to the vtns directly? I have this doubt because I have found the draw below. Apparently the vtns is a passive switch so could be...
  6. AlbertoIt

    Need help with VTO2202F-P

    Ok, I'm definitively an idiot...I was trying to connect to a non Poe port of the switch...it seems to be ok connecting in the right port. But I still have a question. Could I damage this vto if I connect to the vtns1060a? I'm asking because I found this (see picture) in a UK website. Inviato...
  7. AlbertoIt

    Need help with VTO2202F-P

    Hello guys. I have bought a new VTO2202F-P that was intended to replace my broken VTO2000A. I wanted to test it before mounting in its place so I connected it to my VTNS1060A but it didn't show anything....then I tried to connect to a Poe switch and nothing happened as well. Finally I tried to...
  8. AlbertoIt

    Powering 2-Wire VTH1550CHW-2 without VTNC3000A

    I'm not expert but I don't think it is possible because, besides the powering matter, the vth's couldn't communicate with the vto without the vtnc. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  9. AlbertoIt

    PFA 137 vs PFA 130e

    My mistake sorry, you are completely right. I have just checked twice with accessories selector and they are compatible. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  10. AlbertoIt

    PFA 137 vs PFA 130e

    According Dahua accessories selector they're not compatible but if you say so I believe :) Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  11. AlbertoIt

    PFA 137 vs PFA 130e

    Are you sure that the pfa130e is compatible with hdw5231r-ze? Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  12. AlbertoIt

    How to wire from VTH/Door for unlocking my front door ? (2 VTH and 1 VTO)

    Yes, you don't need an extra unlock button unless you don't want to have one (i.e. nearby the door as I have). Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  13. AlbertoIt

    How to wire from VTH/Door for unlocking my front door ? (2 VTH and 1 VTO)

    Yes but remember that vto can't give power to the electric lock, so you need a power source too. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  14. AlbertoIt

    How to wire from VTH/Door for unlocking my front door ? (2 VTH and 1 VTO)

    The electric lock is controlled by vto not directly by vth, so you have to connect it to the vto. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  15. AlbertoIt

    Ceiling Mounts

    It's just an aesthetic matter. Unless you have a false ceiling a junction box is required to hide cables. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  16. AlbertoIt

    DAHUA Intercom VTO2202F-P and VTH1550CH compatibility

    Hello, I had an intercom system composed of VTH1550, VTNS1060A and VTO2000A. The VTO has died due to water problems so I wanted to replace it with the new VTO2202F-P. Some vendors told me that this VTO is compatible with my VTH, just need to flash a sip firmware because newer dahua intercom...
  17. AlbertoIt

    Water infiltration in vto2000a intercom

    For sure it wasn't condensation, it was soaking wet. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  18. AlbertoIt

    Water infiltration in vto2000a intercom

    Probably it's ok for normal rain. Have you heard about recent flooding in Venice? I live not far from there and the rain was really heavy with strong wind. Anyway the vto is definitively dead...now I want to buy try the new vto2202, it's ip55 so should have a better rain protection. Inviato dal...
  19. AlbertoIt

    Vto2202f-p intercome

    Hello, does anyone has tested this new intercom? It seems to replace the vto2000a but it's not clear to me if it's compatible with my vth15550ch and vtns1060a. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  20. AlbertoIt

    Water infiltration in vto2000a intercom

    The only light on seems to be the one of the nameplate in the front part. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  21. AlbertoIt

    Water infiltration in vto2000a intercom

    What should I look for? USB-UART? Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  22. AlbertoIt

    Water infiltration in vto2000a intercom

    Sorry but I'm not that smart....I have no idea what USB-UART is. In any case I have to replace it because the main problem is that this intercom unit is ip54... Unluckily I didn't notice before purchasing. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  23. AlbertoIt

    Water infiltration in vto2000a intercom

    There was lot of green oxide inside... Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  24. AlbertoIt

    Water infiltration in vto2000a intercom

    I have already disassembled and dried, it seems to have power (blu light in the front is on) but doesn't work. Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  25. AlbertoIt

    VTO2202F-P

    Hello, does anyone has this new Dahua vto model? I wanted to know if it's compatible with VTNS1060A switch and VTH1550CH monitor. Asking because I want to replace my VTO2000A keeping the rest of the system. Thanks Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  26. AlbertoIt

    Water infiltration in vto2000a intercom

    I forgot the picture.... Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  27. AlbertoIt

    Water infiltration in vto2000a intercom

    Hello after an heavy rainshower with very strong wind I noticed that my vto2000a was off and there was some water drops inside the camera plexiglass shield (see attached picture). The vto is still off...do i have to consider it as died or is there something that i could try to do? It seems that...
  28. AlbertoIt

    Dahua and choppy video?

    Is your NVR connected directly to a router? Inviato dal mio Redmi Note 5 utilizzando Tapatalk
  29. AlbertoIt

    gDMSS works only on (any) wifi

    Hello, since two weeks ago (could be more because I didn't get into gDMSS for a couple of months) I started having "failed to connect" on my Xiaomi phone just ove cell data. When connected to WiFi (at home or anywhere else) everything works properly. It works also on my wife's iPhone (with iDMSS...
Top