Search results

  1. D

    Camera with coax connection to recorder with POE

    Thanks for the explanation, this is what Jarrow also communicated to me.
  2. D

    Camera with coax connection to recorder with POE

    Have a recorder with 8 channels to which a number of cameras are connected via POE, so utp cable. I still have some older cameras that I would like to connect to this recorder, is this possible? and if yes, what do I need for this? Attached photo of type of camera and recorder.
  3. D

    Camera with coax connection to recorder with POE

    Ok bedankt, als ik de website open, komt die bij mij in het nederlands.
  4. D

    Camera with coax connection to recorder with POE

    Heb een recorder met 8 kanalen waarop een aantal camera's zijn aangesloten via POE dus utp kabel. Heb je nog enkele oudere camera's liggen die ik zou willen aansluiten op deze recorder, kan dit? en indien ja, wat heb ik hiervoor nodig? In bijlage foto van type camera en recorder.
  5. D

    Overgang nacht naar dagmodus Dahua IPC-HDW1531S

    Nobody? I opened the camera and reset it, no change.
  6. D

    Overgang nacht naar dagmodus Dahua IPC-HDW1531S

    Heb een IPC-HDW1531S die van de ene dag op de andere niet meer overschakelt van nachtmodus (zwart/wit) naar dagmodus (kleur) wanneer ik hem opnieuw connecteer dan start hij terug op in dagmodus (kleur) wanneer het donker wordt gaat hij in nachtmodus (zwart/wit) maar de volgende dag blijft hij op...
  7. D

    Reset Dahua nvr 4208

    I went to a dahua specialist with my recorder, he reset my recorder, I don't know how this happened, there is indeed not much to be found on the net, and those who can keep it apparently secret.
  8. D

    Reset Dahua nvr 4208

    Doesn't help, tried several times, there is there still a battery on the other motherboard, is this battery soldered to cause the problem?
  9. D

    Reset Dahua nvr 4208

    Am back, took a closer look at the contents of my recorder and there is a 2nd motherboard on which the utp connections are and I do find a J1 there, see photo, so try to reset there? and should the cameras be connected or not, have they also been given a password with the NVR?
  10. D

    Reset Dahua nvr 4208

    Looked everywhere with magnifying glass on the motherboard, nowhere a J1 to be seen on this motherboard, had already seen such a movie on youtube
  11. D

    Reset Dahua nvr 4208

    This is the answer I got from Dahua Benelux. If you do not remember the password of the NVR or camera, the camera does not have a reset button, and you no longer have access to the email address entered during the initial installation, or do not remember this, and you do not remember the answers...
  12. D

    Reset Dahua nvr 4208

    Thanks, thought I had a good NVR and now it appears that I am nothing with it, I sent an email to the auction site where I bought it, hopefully they know where this comes from. Then take a look around to see if there is an installer in the area who might want to help me. Is it not possible to...
  13. D

    Reset Dahua nvr 4208

    I even sent an email to Dahua service center and they are not willing / unable to help me.
  14. D

    Reset Dahua nvr 4208

    Here is the picture.
  15. D

    Reset Dahua nvr 4208

    Nowbody?
  16. D

    Reset Dahua nvr 4208

    This is it.
  17. D

    Reset Dahua nvr 4208

    Purchased this 8 channel recorder through an auction, it is locked with user and password. Have already tried to send a photo with qr code to get a code, get a message that they cannot read the qr code. How can I change it or go back to factory settings? There is no reset button on the motherboard.
  18. D

    Dahua IPC HFW4431R-z Reset or setup- troubleshoot

    I have tried this, it does not work.
  19. D

    Dahua IPC HFW4431R-z Reset or setup- troubleshoot

    It does not work
  20. D

    Dahua IPC HFW4431R-z Reset or setup- troubleshoot

    Ok i will try, connect the 4 together and then power on?
  21. D

    Dahua IPC HFW4431R-z Reset or setup- troubleshoot

    Here a picture of my camera, can you help me find the reset connections?
  22. D

    Reset camera

    Hallo, i am living 50 km near Kortrijk. I don't know if this is even a dahua camera, I already opened it, but I can't find a pressure switch to reset, otherwise I would have already done this. If I needed to know which wires to short, I can do this too.
  23. D

    Reset camera

    Hello, I chose the 2nd option and sent a qr code, received an email with the following text but never received the email with the security code. What can i do now? This is te text i received. Dear valued customer, Your password reset is well received. The password reset authorization will be...
  24. D

    Reset camera

    Have a camera here that I want to reset, opened it up to see if it has a reset button on it, it is not present. Can I see it in my network but cannot log in because I do not know the password, how do I solve this? Attach the label present to the camera. Kind regards.
  25. D

    Change camera password.

    Thanks I try it out.
  26. D

    Change camera password.

    That's the problem, how do I reset the camera if I can't get in?
  27. D

    Change camera password.

    Internet explorer asks for a plugin, but does not know which one. The problem is that I cannot change the password of the camera that is "admin", I do this in the NVR, only place where I can do that, I get no more image of the camera, change back to "admin" and I have an image again. I want to...
  28. D

    Change camera password.

    Thank you for helping me further. The cameras are connected to the NVR with UTP cable POE. The NVR is connected via an HDMI cable to a PC screen and via a switch to the internet. All this works perfectly. Photo1: display screen nvr Photo2: display of camera setting Photo3: NVR requested on PC...
  29. D

    Change camera password.

    Hello, I changed my password on the nvr, no problem. When I look at the password on the camera I see that it is user:admin and password:admin. I change this to a different password but then I have no longer have a picture, if I change back to admin, I have a picture again. Calling the camera...
  30. D

    Change camera password.

    I change the password of the users. How do I change the password on the camera?
Top