Search results

FWIW I never did get a handle on this, but the system just humms away. It's a dedicated system that ONLY deals with BI - so I'm not too terribly concerned about it. Everything works, just the memory usage stood out to me. I'm no longer running Sense in a docker, but a "standard install now"...

Thanks for that link, I'll check into that. After a recent "life event" I would really like to hash this out so that I can get notified if someone is walking around my property when I'm not home.

... bump ....

BI PC version 5.6.3.7 x64 (however my issue has been on every Blue Iris version/not something new) BI IOS version 2.03.07 IOS 16.1.1 (however occurred on prior 15.x versions as well) I deployed BI a few months ago and have been learning as I go. Been trying to read/search the forums as well to...

Well, I'm not sure this is the desired result using the custom model. Apparently I'm a Fire Hydrant. I have 2 cameras facing somewhat similar areas (about 50' apart, facing eachother). I walked between both of them; in a big circle as a test to see any differences between the default...

there is the reason i chose that screen name :banghead: Well, RIF/RTFM/Search struck again.... from what I found (really should have searched better before I posted), it's okay for it to be grayed out, you just define things in each camera tab instead. edit to add.... for local install of...

well, I tried a local install of SenseAI as the docker started to frustrate me. When attempting to do the custom model config under the BI AI tab, the "use custom model folder" is grayed out and I'm unable to check the box - is that anticipated behavior or do I have a problem? I cannot check...

Damn, that was fast.. thanks! Being that I'm running SenseAI in a docker.. can I place it in my windows file structure (for BI) and point from there, or do I need to do something with docker as well?

Mine is currently updating via the docker pull, so for whatever that's worth. I see a lot of people mentioning "YOLOV5L" I can't seem to find much on the site about it/using it... can someone point me in the right direction so I can start reading about how to use it?

Just noticed you are using a USG; I am as well. using a separate POE switch on my system, the traffic from the cameras is quite impressive. I'm very happy that my USG isn't having to manage that data, as well as the other 40 devices in my house (mix of wired/wireless/IoT).

I just went down this route... I am far from an expert, but here's my $.02 Needed: -POE Switch -2nd Network card for your PC to isolate the cameras from your primary network (new NIC will connect to the POE switch, existing will connect to your LAN) -Surveillance HDDs of your choice I did a...

I should mention that the other day I changed my cameras from .265 to .264 to see if that would change anything - nope, it did not. CPU is even about the same. CPU/GPU encoding within BI doesn't seem to make much of a change on processor/ram load either. Please don't take that as a complaint...

Just wanted to say thank you. I was really trying to avoid punching a hole in my firewall (I hate port forwarding) for Blue Iris to get notifications of triggers when I'm not home. I have the ability to VPN into my home network, but that's a bit of a pain in the butt to use constantly. This...

some more info. Currently, 4 cameras get filtered through the AI for alerts. The other 9 cameras get filtered through the AI, however there is NO alert sent on those for motion. I'm running the CPU version of SenseAI, and it appears to be using very little processor time. I don't see any...

Well, my memory issues are still going on. While fine-tuning things (went from .265 to .264, and a ton of other settings for AI/Alerts to filter down all the push notifications) I realized something. If I stop running the BI interface and just have the service running in the background, task...

I remember reading that page the other day, was really interesting. I’ve thought about adding LPR, however for my use case I’d have to find a free version/locally run. Frankly it’s not something I “need”; but it would be fun to play with. I’m just not too interested in a monthly subscription.

My NVR settings were recording the full 4mp/25FPS/.265. Substreams were used when streaming content to mobile devices on non-WiFi connections (LTE). Blue iris is setup to record both substreams and primary streams.... "Continuous + Triggered". When I've been reviewing alerts (motion...

Got the graphics driver fixed, GPU is working and the processor use has dropped a bit. Part of my higher CPU use is that I'm running everything at 25FPS instead of 15FPS and using .265 instead of .264 - I wanted to see what this system "can do" compared to how my old NVR was setup. I can...

Looking further, it appears my gpu isn’t doing its job; drivers appear borked and a reinstall isn’t working just yet. I’ll have to resolve that before messing with anything else

First and foremost, I'm a newb when it comes to BI - I've been up and running for about 24 hours now. System: i7 - 8700 32 gigs of ram NVME Primary, "Security Camera" Spinner disks for storage Intel GPU doing it's job 13-4mp cameras running at 25fps (yeah, i know... I know). Sense AI running in...

I figured it out..... I installed "NetTime" (NetTime - Network Time Synchronization Tool (timesynctool.com) The problem was the Windows Time Sync service, while set to "manual" was still running in the background. I stopped and then disabled the service. Immediately the cameras began grabbing...

This is weird. Either this was a LOT easier to setup than I made it out to be in my head, or I'm just blissfully ignorant at this point - time will tell. Cameras are all running (still!), HDD is getting some space used... so it appears that the recordings are... well, recording. SenseAI is...

Well, my primary goal of getting the cameras up and running on BI is complete (I think). Still don't know, what I don't know..... but I think it's coming along. Have 13 cameras running, recording set to constant/triggered (may adjust to constant/alert once I figure out the difference). Have...

Well, I finally got the NVME for the BI computer; got windows and what-not configured and ready to go. Have a fresh install of BI (v.5) on the system and disabled windows updates for the video card per the wiki. My plan is to either later today or tomorrow, to remove the NVR from my system and...

Currently with my NVR; 13 cameras at 4mp @ .265, I get about 12 days of history with 24/7 recording. I'd like to be able to get 2-3 weeks of recorded data out of the BI system, eventually.

Well, the computer got here and it works, so that's a plus. Unfortunately it looks like USPS lost my SSD, so that'll slow the project down as I wait on a resolution there. I currently have 2-4TB drives in my 5 year old NVR. Any harm in transferring/reformatting those to this system for use...

alright - ill go that route Part of this change is a complete re-wire of the office/network. Doing a full ubiquiti deployment/rack mount to upgrade how a few things are handled. The camera system will be on a different network bridged by the PC/NVR. Putting a 2nd NIC in the PC to facilitate...

Appreciate that, ill knock that out - I have some time before the computer gets here, at least. Picked up a 500 gig m2 drive with some good specs for $50 - can't beat that. Need to figure out if im going to run the 2 storage drives as a mirror'd set (protect against failure) or just use the...

ended up ordering that i7.... guess im going blue iris LOL Will install a NVME SSD as its missing all drives.

God I wish BI worked on Linux or OSX.... that would really make this a no-brainer. Looking at this little guy: HP i7 8700 32 gig - seems like it would do the job well. Other option is a 9th gen i5 with 16 gig of ram. Thoughts?