Search results

So the RCA doorbell uses the existing door chime. Do you have to use the white door chime that comes with the Reolink? Looks like there is a $25 off coupon right now on the doorbell on Amazon.

Need a recommendation. Blue Iris 5. Cant use POE. Need to use the current doorbell power supply. Trying to replace a RCA HSDB1 on WIFI

I've never downloaded or worked with Blue Iris Tools... So I need to download BlueIris tools to the PC that has Blue Iris 5 installed on? What do I need to configure inside BI Tools in order for it to update the DDNS ?

So in order to get the DDNS to show the new WAN IP, I have to manually go into ipcamtalk DDNS, hit Update, Use current IP address, then it shows the new IP Address. I thought this was supposed to happen automatically? I did not sign up for any of the paid plans. Just the free one.

So Im not sure what I did wrong here. I had everything setup. It was working until Verizon assined a new WANIP address. Screenshots attached shows what I put in. I put the DDNS name (michaelJamesLVK.ipctddns.com) in the Blue Iris Android Google app and I could see the cameras and I could see...

Just made the adjustments. Will see how it reacts this week. thanks

So I did a factory reset on both cameras the 2 meg and the 4 meg. But I am noticing a bunch pizeliztion now. Its mostly thur the BI5 interface. Any suggestions. I lowered from 30 fps to 15 fps

I think I figured it out. You have to change the password under SEARCH SETTING in the ConfigTool (upper right). Password has to match what you set the camera New Password to when you initialized the camera the first time.

So I went into my laptop and turned my WIFI off. I went into only my Ethernet adapter and chaged the setting to 192.168.1.10.. (Not sure what the DNS server settign were supposed to be, so I used 8.8.8 and 8.8.4.4 I was thinking the ethernet needs to be on the 192.168.1 not the 192.168.50...

UGH, so I went to my other Dahua Camera. I did a factory reset. Inside the ConfigTool and Initialized the camera using the existing 192.168.1.108 IP address. (It sets it to "1" not "50". So I then went into Edit and tried to change to: Static IP Address 192.168.50.110 (I didnt see this...

Thx. but I thought that 15 fps means you set iframe at 30?

I lowered both Main Stream and Sub Stream to 15 from 30 fps. What should iFrame be set at now?

Yes, P2P is enabled and says "Online" The camera is plugged into an Asus RT-AX82U (AX5400). I am running it as a mesh node. The main router is an Asus GT-AX6000. Both are running WIFI 6 AX mode,

So here is where I am at. I have not done a factory reset or gotten a different power supply. I want to let you know what has happened and maybe we can pin this down. So after about 4-5 days, the PTZ would stop tracking and freeze on 1 location (which isnt usually the Preset 1). It would...

Anyone who can dig in here is appreciated!

So here are the settings I used. (See attached) is this correct? For SERVER: There was also an option for the server to be www.DYNDNS.ORG (Static). I used www.DYNDNS.ORG (Custom) For HOST name: I used what ipcamtalk DDNS gave me. For User name/Email: I used the email I have on the ipcamtalk...

OK, some Im confused. 1) When I went to Ipcamtalk offers a free dynamic dns service ... It never asks for a password. It gives an API key. 2) On the Asus end: a) You have to pick a server from the pull down menu. The manual says you have other options but from the screenshot below, you only...

So I have to admit, I've never setup DDNS or IPv6 before. Is one simpler than the other? I'm including screen shots from my Asus router. Also, after this is setup, do I need to make changes inside the Blue Iris software on the server?

I did ask.. they said no to a static WAN IP. Not sure why its so hard for them to do it.

Hello ya'll! So I went with Verizon's home internet 5G for my houseboat. 90% of the time its at the dock. Only a couple times a year do I take it out on the lake. the problem I'm running into is that it keeps changing it WAN IP address. Since I'm about 2.5 hour drive away, I'm not sure if it...

Well, I thought privacy masking worked this way but it doesnt. It still stops on the stop sign. I'm trying to put tripwire on both sides and see if that helps

Attaching screen shot. Are these correct for what I am trying? I assume this is the menu you are talking about

Thank you. What setting controls the point at which the camera starts to focus on a person walking down the street towards me?

Thx everyone. I want to make sure what "Target Tracking Size" actually means.. So the lower the number, objects that are farther away and smaller will be picked up. I'm trying to get the camera to pick up objects at the top of the screen faster (start zooming faster). So that it picks up the...

Where in settings of the camera can you put a black privacy mask over an objec tlike the stop sign. I dont see masking options. I need specific instructions, step by step if possible.

Here are my current settings. Please advise

Thx, I had already knocked the gamma down and turned contrast up and I have PFA off. See attachments Any suggestions?

https://photos.app.goo.gl/HLSZj2dWPqLkqiJx5 here is an example of the behavior where it wont stay locked. This is a link from google photos Once it hits the stop sign, it looses lock.

I'd rather not use a dome like that one due to distortion. More of the traditional PTZ look like the sd49425xb-hnr