Search results

  1. cagenuts

    Bi 5 loses license on every reboot

    Thanks, I will follow your advice.
  2. cagenuts

    Bi 5 loses license on every reboot

    Good point. I don't think so as I bought three licenses from BI directly and the other two systems are fine. I'll check though.
  3. cagenuts

    Bi 5 loses license on every reboot

    I'm running Windows Server 2016 Standard Version 1607 (build 14393.3504) with BI 5.1.0.0 x64. We have load shedding (scheduled power outages, a third world issue) most weeks and when power is restored and the server boots up again, the BI license is missing and I'm prompted to punch it in. This...
  4. cagenuts

    Using Raspberry Pi B+ / Raspbian to view Blue Iris UI3!

    Yep you're correct. I had to reload a Pi and everything is as you say. Thanks.
  5. cagenuts

    Using Raspberry Pi B+ / Raspbian to view Blue Iris UI3!

    Step 1. nano .config/lxsession/LXDE-pi/autostart Step 2. @chromium-browser --start-fullscreen http://192.168.50.20:81/ui3.htm?maximize=1 Obviously change it to suit your BI server address.
  6. cagenuts

    Using Raspberry Pi B+ / Raspbian to view Blue Iris UI3!

    I respectively disagree with this. I have seven (7) dedicated RPis mounted on walls and for every one I had to install the xscreensaver (and then disable it, odd I know) to stop the screens from going blank. This is across Pi Zero, RPi3 and RPi3+. For the record though, I don't remember if this...
  7. cagenuts

    Blue Iris UI3

    I have four Pi3s each with their own monitor scattered around the house. I just use Chromium that is preloaded. I initially tried with a Pi Zero but the little Wireless chip just couldn't handle more than one camera.
  8. cagenuts

    Blue Iris UI3

    UI3 works like a bomb on my Pi3s. I have four running like this and sometimes I think the wireless is lagging so I'm going to run some Ethernet cables. Bog standard Raspbian with the stock browser. You just have to to install the xscreensaver (and then disable) it to stop the video going to sleep.
  9. cagenuts

    Blue Iris UI3

    Thanks very much!
  10. cagenuts

    Blue Iris UI3

    Has there been a recent change in UI3 regarding the H.264 streaming profile? I suddenly can't see H.264 streams using Edge, IE or Firefox. Only Chrome now works and I can't use Jpeg streams for remote installations as the data used is too much. Any ideas please? I'm running Version 4.8.4.7 and I...
  11. cagenuts

    Blue Iris UI3

    On the nose! Thank you very much!
  12. cagenuts

    Red/yellow Clock icon on UI3/Raspberry Pi

    I get the dreaded yellow clock when running a bunch of Pi Zero W. All four of them won't stream properly. It matter not whether there's one or four cameras nor whether you set the profile to 720p, 480p or even 360p. Anything lower and the resolution is just terrible. I've tried dropping the bit...
  13. cagenuts

    Blue Iris UI3

    I may be blind but I don't see this option. This is what my screen looks like. Thanks Hilton
  14. cagenuts

    has anyone used onvif for hikvision cameras through ivms 4200?

    On my Hikvisions I have manually enable the ONVIF protocol so this may be your problem.
Top