Search results

  1. jrf

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.810.0000000.4.R.200509.zip;

    I flashed a few times with no luck. So then I re-downloaded and flashed again and no luck. Then I reset to factory defaults AGAIN and now it's working. Just posting this here for others.
  2. jrf

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    I just updated and having problems with the live view on latest version of chrome and edge. Also the old NACL plugin will not let me login. I was able to use internet explorer to see a live view though. Odd. EDIT: I had to do everything twice to get it to work. First time was attempt...
  3. jrf

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.810.0000000.4.R.200509.zip;

    Apparently I'm going to be the Guinea pig on this one. Upgrade went very fast. However two small problems. 1. Live preview does NOT work for me in latest version of Chrome or Edge. 2. Using the old NACL plugin I can not login. I get an error message that says "Failed to login the plugin!"...
  4. jrf

    homerun all data cables in new home addition, or just a few?

    A little bit more work...but might make those 26 runs easier. Can you get a really good accurate measurement for the longest line you have to run? If so...pre cut all 26 and pull them all at once if you can. Or Beer/Pizza and friends :-)
  5. jrf

    homerun all data cables in new home addition, or just a few?

    1. No. It for centralization of those lines and a single management point. I don't see troubleshooting changing much. 2. Yes it would/should easily handle the traffic (That I could imagine one to have in a house) fine. If you have physical constraints to running the wire that's another story...
  6. jrf

    homerun all data cables in new home addition, or just a few?

    If it was me, homeruns for sure!! I'd also run twice as many as you think you'll need. Running cable in new builds is so easy and flexible...that for the cost of the cable do it now! Even if you don't wall plate/terminate them all...at least they are there. Just number/mark them. For your...
  7. jrf

    SD59225U-HNI DH_SD-Eos_MultiLang_PN_Stream3_V2.800.0000000.5.R.190827

    Is there any way to roll back to 2.623 from 2.8? I thought once you went to 2.8 there was no rolling back?
  8. jrf

    Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

    Mine is outside during our long and cold winters and has held up fine....I think. The only thing I swear is going on is the image is getting darker over time...but I don't have a good way to prove that. Mine is setup in the back field and generally only auto tracks deer and other animals in...
  9. jrf

    A prototype for alerting based on object detection

    The technology that's available now is fun to mess around with. I did this with some python scripts and the sighthound API a few years ago. Had it tuned pretty good to then go through my home automation system to handle the alerts and tracking of the same vehicle. It worked great for eliminating...
  10. jrf

    Little help with exposure

    So I think what I have been seeing is a gradual change. Meaning the image wasn't only like this and it didn't happen over night. I've thought it was looking dark but finally I can really tell. Yes plastic film is off. I've had this camera working great I might add for almost 2 years I think. I...
  11. jrf

    Little help with exposure

    In addition to trying both those things I also played with other exposure settings and brightness. Turning up the brightness just washed everything out. I haven't changed these settings for over a year. Is it possible something is wrong with the camera?
  12. jrf

    Little help with exposure

    Picture settings: style: standard All settings from Brightness to Gamma at factory 50 Exposure settings: Anti-flicker: Outdoor Mode: Auto exposure comp 25 Backlight WDR - 30 I'm using basically the same settings as my other 2mp starlights
  13. jrf

    Little help with exposure

    I have a Dahua PTZ SD59225U-HNI . It's picture has been seemingly dark. Something I think I've noticed but not really paid much attention to until today. Even though most of the scene is snow. The image is very dark compared to my other cams (5231s).
  14. jrf

    No recordings after 20191231?

    These are both dedicated drives...no files whatsoever on them outside of BI clips. C: drive is dedicated OS drive and BI program files with DB on them. It's a 256G SSD drive with over half of that space free.
  15. jrf

    No recordings after 20191231?

    I was going by the BI manual which states "A drive should always be configured with enough headroom for a complete clip from each camera that’s recording to that drive" which in my case is 25G (for all cameras). By all means I can up that a bit.
  16. jrf

    No recordings after 20191231?

    I just showed you my allocation...it wasn't over allocated. I don't know what happens. All I know is that I do have to manually delete files to get it back up and running again. And it isn't consistent. Possibly a write error? Move error? Permissions error? I don't know. But it is NOT over...
  17. jrf

    No recordings after 20191231?

    Nope, sure didn't...the settings haven't changed in months. The fix is a bug in BI. This system has been working with these drives for a few years now. The cycling of videos from my "new" drive (SSD drive) 500G 465 formatted and I allocate 420G to BI. The ONLY thing on that drive is a NEW...
  18. jrf

    No recordings after 20191231?

    Do you know how that happens? Meaning it's been running great for months...then all of a sudden it gets that error. Then when it does over allocate. what's the best way to fix it. Do I just need to delete enough clips from the over allocated drive to get it under the proper allocation and...
  19. jrf

    No recordings after 20191231?

    So I have had this happen to...and oddly on Jan 1st also. It seems maybe once a year my drives fill up and BI stops recording clips (obviously drives are full). I'm running the same setup with some buffer on all my drives. I don't set the limits right at the max. I generally have to go in and...
  20. jrf

    Dahua day/night switch utility - DahuaSunriseSunset

    You have the offsets correct for what you want to do. On the cam setup the "schedule" for full time. The utility will switch it.
  21. jrf

    BI5 LPR Setup Help

    Add me to the "what next" pile...
  22. jrf

    Which dahua cam for recessed ceiling mount?

    That is more location dependent. That being said mine indoors in a corner surrounded by 3 white walls is a non issue. Of course the paint is flat which helps.
  23. jrf

    Which dahua cam for recessed ceiling mount?

    The mini wedge has IR....and sound
  24. jrf

    Which dahua cam for recessed ceiling mount?

    I use one of these: Mini IR Wedge w/SD, Audio (2.8mm, 3.6mm, 6mm): IPC-HDBW4231F-AS In the corners inside my house and am very happy with it...along with WAF approved.
  25. jrf

    Upgraded to 5, no problems

    I'm not sure you need to do that anymore. UI3 was in 5 and accessable if you go to http://IPADDR:PORT/UI3.htm. It looks like there is a checkbox to default to this on non IE browsers...just doesn't seem to be working. A simple redirect from default.htm should be all that's needed for me...
  26. jrf

    Blue Iris 4 to 5 Migration Guide

    Ditto to both of these. Installed 5 yesterday, removed 4. No problems so far.
  27. jrf

    Upgraded to 5, no problems

    I upgraded yesterday too...no issues. Did not have to change www folder either. Still running great today. Only issue I see is when accessing via www...chrome gets redirected to http://192.168.13.60:81/default.htm and not the /ui3 page. Even with that setting on. Otherwise it's running fine.
  28. jrf

    Pre-Trigger Buffer with Sentry

    Ahhhhhh...that makes a lot more sense as to why I'm seeing that. No wonder the hit rate is so low. With my sighthound integration I save the initial image captured, if I get a hit then I SMS that image.
  29. jrf

    Pre-Trigger Buffer with Sentry

    I do and it works well for triggering on motion and my setup that I use to send images to sighthound. But the images I'm getting from Sentry 50% of the time are missing the person. Unless they are slow (like my UPS guy, lol)
  30. jrf

    Pre-Trigger Buffer with Sentry

    Ok, thanks. I'm seeing this pretty often, at least 50% of the time. Looking for what settings to change to help it.
Top