Search results

  1. TechBill

    Ezviz doorbell and transformer

    That is the one .... :)
  2. TechBill

    Ezviz doorbell and transformer

    Got a home depot near you?
  3. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    Power cycle your DB1, it should make it readable again without reformatting. I was facing the similar issue myself.
  4. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I get those once a while .. that why I added a wifi outlet controller on my transformer to power cycle my DB1 so I don't have to crawl into the attic to unplug it every time I need to reboot it. Also, try accessing your recording after power cycling to see if it works again. I did reformat at...
  5. TechBill

    This forum needs a deal(s) subsection. Here's a good deal [Prime Day deal]

    Look like Amazon sold out their stocks already ... now it's "available from other seller"
  6. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    Yup did it all like 5 times ... even replaced transformer and chime .. still same .. I could see that chime hammer pin is pressing against the chime all the time. Not dropping down back to idle postion if you get what I mean unless I take the power off of it.
  7. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I been back and forth with EZVIZ support and they had be send photo of my wiring and they asked me to switch wiring around etc. Chime still not working .. DB1 is working fine via app, it just not triggering the chime anymore. They are going to send me another power kit to see if that...
  8. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thanks for sharing and keep us up to date too!
  9. TechBill

    My first capture post! Petty and Political...

    I seen post here where folks hide camera inside a birdhouse on a pole in the middle of the yard. I plan to do something like this one day to aim it directly at the mailbox but keeping it at a safer distance away from the curb.
  10. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I heard back from them and spoke with them on the phone. Now, they want me to take pictures of my wiring setup and email it to them ... sigh ... I will do this tonight after work.
  11. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    EZVIZ support asked me to take a photo that I did select the proper chime and send it to them. So to please them, I deleted it again and went through the whole process of adding DB1 again and took a screenshot of the chime selection. Then I email it off back to them last night. I have not yet...
  12. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I was running it on 16V 10A and I just tried it on 8V 10A. Voltage meter tested it at 9V It only produced red led around doorbell.
  13. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hrmmm too much voltage???? I am going to go lower the voltage on mine now to see if that fixes my issue
  14. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    We used to be able to select chime in setting but EZVIZ took it out about 3 updates ago. It will only show up when you are adding new devices to EZVIZ app
  15. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    Interesting you do not need to reset doorbell to go through setup to get to the part where you select if you’re using chime or not. just be sure to save QR code to you phone which will have serial number then delete the DB1 offthe EZVIZ app and add a new device again Follow the steps and...
  16. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I heard back from support saying the same thing .. go reset and reinstall it again But interesting part is that they said before reinstalling it is to make sure I removed the DB1 from my EZVIZ account first. Also that QR code can be saved to the phone in the Setting -> About in EZVIZ app now...
  17. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I would wait on C7 unless it offered with a discount or a limited time sale price .. I do have C7 sitting here in the box but I am still running on C5. The reason I brought C7 because I was offered a discount on it so I grabbed it knowing that I am not going to be setting it up right away and...
  18. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    it made no difference ... it still active the doorbell pin pushing it against the chime bar.. I am starting to suspect my power kit is bad now .. or worse my doorbell circuity that operate the chime is bad ... Look like I am going to have to contact EZVIZ support on this one ..
  19. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    it was working however sometime memory card can’t be read anymore until I power cycle it so I just upgrade the PSU to see if it resolve it issue I just disconnect the chime and guess what. The chime pin dropped down some so I was like whatttttttt. I reconnect and the chime pin when back up...
  20. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I took out the Sage sensor and disconnect it from chime. The chime is still not working even without the Sage sigh. Look like the upgrade transformer I put in probably blew it. I will test it by moving lead to second doorbell chime
  21. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    Stick with your C5 for now, there some serious bugs with C7 so I would not migrate to it yet. I have both C5 and a new C7 still in the box but I been following the community board and it look like C7 isn’t exactly ready for primetime yet if your a zwave user. They will get bug sorted out.
  22. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    HE is localized home automation/control. HE allows open source drivers or open source apps to be installed on it. We are just pretty much paying for the core and hardware which is not much more than a RasPI kits with case and a zwave/zigbee usb radio stick :)
  23. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    You should check out Hubitat Elevation hub .... They could use good coder over there too ... https://hubitat.com/
  24. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    There is another one "Nexia" but it's a zwave plus and you being on the other side of the pond which I believe zwave frequency is different over there so it probably won't work for you...
  25. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I haven't went to pull the battery out yet. My son gotten ill last night and most of my attention went to him. I will go pull the battery out today and see if it restore the chime on my mechanical doorbell. ' If it does restore the chime then I will reinsert the battery back in and test it...
  26. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    Did you had it hooked up to a chime? I thought I recalled you don’t use a chime ... I will go power cycle Sage sensor then
  27. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    Strange. Our chime not working anymore. Even Sage sensor is not triggering but I know it working because I can manually trigger it in my hub. Anyone experience anything like this before?
  28. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    I don't see it in the EZVIZ app camera setting but I haven't look in the batch tool yet. Do you know if we can set motion detect recording post time? I think it being cut off too short for my taste and I would like increase post recording additional 10s.
  29. TechBill

    Starlink satellite internet

    https://arstechnica.com/information-technology/2020/08/spacex-starlink-beta-tests-show-speeds-up-to-60mbps-latency-as-low-as-31ms/
  30. TechBill

    New RCA HSDB2A 3MP Doorbell IP Camera

    You can still use EZVIZ app to set up the DB to connect it to your wifi without creating an account with them. Just delete it after you're done setting it up for the first time.
Top