Search results

Yes settings in putty are important. See first page of thread..

Still subscribed on the thread :-) I did try mine on a raspberry to know sure. the first one got fried, the second one worked on a raspberry, after that I used it on the NVR connection settings in putty (if you use that) are important but also the connected wires...

I used the included power supply to be sure the poe+ switch was not the problem. Unfortunately it is not easy to remove the cam again because of his location. I also hot it that tye cam can't look straight down. The manual says 90° tilt. But that is not true for me..

Did you ever resolved this problem, I also have this problem. I reboot the camera every night , but after some time PTZ is responding badly. Also the sometimes makes a lot of noise when moving. I already switched from POE+ power to the included power supply, but this didn't change anything.

Here is a picture how I connected my longse : https://photos.google.com/share/AF1QipOEpYWH3ELBGTfQbVen5digcpvSkX-DWWP2uh-T1Tqv1bH7rQCFKM5JGLZEXkFw5w?key=OTZJMVJSMEh1YUZtZzRQWjZfcVg1RXN6cGlseHVB

Hi, I didn't have a good firmware either. I actually got it from the longse / herospeed site. After viewing it with an editor i found out it was cramfs file with a litte header that I striped.. But it was alastairstevenson who provided me the different files. I could find the hashes and file...

Hi, it seems very simular but it isn't exact the same. Problem seems similar, mine also did show the boot splash. I was never able to fix it with an usb update. You will need serial acces to fix it the way I did. This photo shows the longsue nvr I fixed, see the attached serial connection ...

If you find a good replacement.. small .. ptz .. audio .. outdoor, let me know. Dahua black face starlight is al little to big and to expensive for me.

I hava a dahua black face to.. When using it in daylight I have stripes :-( It doens't happen with IR ... So my dahua has his problems to (but i can live with it)

My v2 has the same problem.. died in weather between 5 and 15 degrees celsius. No firmware update done. Tried connecting serial console but didn't get any login prompt.. now serial copper contacts broke off. So it's a piece of junk now. Time to order a new one. Mine was with audio and alarm...

My PTZ v2 mini died after some months.. First it would work for some moments minutes with POE.. then I had to connect it with a separate power supply, worked for 2 days.. now nothing.. when i connect power I see the 2 bottom infrared lights verry short. network lights go on but no traffic, no...

because there is no much info for these longse recorders, I just found out how to get the different rtsp streams from the recorder (by debugging freeip android app) : rtsp://user:password@ipadres:[rtspport]/channelandstream channel 1 = 0 channel 2 = 1 channel 3 = 2 stream 1 = 0 stream 2 = 1...

Webinterface is the same as theire ipcams, you need an ocx and internet explorer... The local interface is nice, semi transprant colorfull menus youtube cms software Manual : http://www.longse.com/UpFile/file/Instructions/CMS%20User%20Manual.pdf I bought it for a friend but wanted to update...

Found the password with google before reading your post. 12345 was the correct password ! system fully operational ! I hope the info in this thread will be helpfull for other people bricking their longse nvr :-) Thx for all the help !

Yep the wizards asks a password and the factory default one in the manual 123456 is not working. Also network default config was gone it tried to set 255.255.255.255 as ip.. But I was already able to log in as root with serial console and set an ip with ifconfig. Webapp or local ui app access...

root paswoord for login serial interface found here by searching on the hash in /etc/passwd: http://forum.videon.spb.ru/viewtopic.php?f=20&t=8338 it is : xc12345 With this i was able to set the network with ifconfig now trying to login via web or gui.. but same password won't work.. it seems...

And now wrote the contents of extract_1 with mw.b 82400000 ff a00000 tftp 0x82400000 Hi3535_App sf erase f00000 a00000 sf write 82400000 f00000 a00000 sa reset and ... we have image But default user admin and password 123456 not working :-( But supose that will be a minor problem :-)

I think i was able to flash the rootfs (extract_2) by this commands : setenv ipaddr 192.168.0.99 setenv serverip 192.168.0.198 setenv netmask 255.255.255.0 mw.b 82400000 ff a00000 tftp 0x82400000 Hi3535_Rootfs sf erase 500000 a00000 sf write 82400000 500000 a00000 sa Commands from the...

when I see this info https://translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=nl&ie=UTF-8&u=http%3A%2F%2Fblog.sina.com.cn%2Fs%2Fblog_63eaeced0102ux4m.html&edit-text= 2) Writing u-boot sf probe 0 mw.b 82000000 ff 100000 tftp 0x82000000 u-boot-hi3535.bin sf probe 0 sf erase 0...

I tried to flash the files but same error.. bad magic or arch I'm pretty sure extract 2 is the rootfs, extract1 are only libs for the ui app. extract1 seems a complete linux rootfs. but why wrong arch or magic is the question. The update file is normally to flash via web interface. when...

Ok. i was able to correctly cut extract 1 .. checksum is the same as APP1MD5 .. or Hi3535_App Now going try to cut extract2, because for me that realy like slike a root file system :-) can't flash right now, that will be tonight

Found some hashes inside the image file COREMD5=100700f56c726a1a307afe1f3203dc21 BASEMD5=44bc9510d34793ef10e1bd23374f2005 APP1MD5=0ea161e21c4258fe7c02d84c0dc24dea WWWMD5=c24cf6b52b8734f293d1a4442e3366ee LOGOMD5=d2fdaf3f881d448ad82e53113d68abf3 UBOOTMD5=9838d8354db16d5e1d16ef0df57d524d the...

Tried to flash it before work this morning, but not working. same error Image Hi3535_Rootfs bad MAGIC or ARCH, so probably the img file is not the format the flash is expects. It's time to setup a proper linux environment to create a rootfs with mkrootfs tool.

Extract2 was more logical for me. But tried extract1 now .. Same error.. Bad magic. Verstuurd vanaf mijn SM-G920F met Tapatalk

thank you verry much .. we are getting somewhere .. I could flash it. and it starts to boot a little bit : jpeg decoding ... <<addr=0x82000000, size=0xc0000, vobuf=0xc7160000>> mmu_enable <<imgwidth=1280, imgheight=720, linebytes=2560>> decode success!!!! decode jpeg! dev 1 opened! graphic...

The commands are available. and the memory adresses in the sdk doc seem the same as in printenv. When renaming uImage from extracted image to HI535_kernel and puting it on usb : 11111111111111111111111111111111111111111111111111111111111111111111111111111 Interface: USB Device 0: Vendor...

Found some info and commands for HI3535 : https://translate.google.com/translate?sl=auto&tl=en&js=y&prev=_t&hl=nl&ie=UTF-8&u=http%3A%2F%2Fblog.sina.com.cn%2Fs%2Fblog_63eaeced0102ux4m.html&edit-text=

The only thing i did was tftp + enter. it downloaded uImage from the tft I set up at 192.168.0.2 environment is back to default after command "reset" + enter No idea why usb flash does nothing. In fact that is how I breicked it totaly, before I had a working webserver, but no working graphical...

Exact autoput when booting with a usb drive Partition 1: Filesystem: FAT32 "NO NAME " reading Hi3535_Uboot.bin reading Hi3535_Kernel reading Hi3535_Rootfs reading Hi3535_App reading Hi3535_Www reading Hi3535_Data reading Hi3535_Config reading Hi3535_Logo reading Hi3535_AutoUpdate.bin reading...

Finaly some time to test. tftp seems not to tkae an anrgment. but i was able to change netwirk settings with setenv and launch tftp. Wich downloaded the uImage but same error : TFTP from server 192.168.0.198; our IP address is 192.168.0.99 Download Filename 'uImage'. Download to address: 0x192...