Search results

Works great for me - I have an 16TB LTS NVR that records my 16 LTS cameras 24/7 and use BI as a camera front end for my home automation system and mobile viewing; neither miss a beat. The NVR and BI PC both have Gbit LAN, and all my switches are Gbit so there are no network issues (cameras are...

I'm using HomeSeer and its BI plugin to interface with BI. I think it uses JSON for 2-way communication between the two programs. Everything is working great, but I have a question that I think is not covered in the documentation. I'm trying to move the schedule logic out of BI and into...

I figured it out - commenting out a few of the divisions in the page's code did the trick.

First off, thank you so much for developing this. It is the only thing that works well in my Home Automation Touchscreen interface (HomeSeer HSTouch). Has anyone made a version of allcams.htm that works like jpegpull2.htm? jpegpull2.htm works embedded on my screens without error, however, I...

Good news: Firmware version IPC3_V5.4.0_160921 has restored snapshot capability, problem is solved. /Streaming/channels/1/picture returns a still picture /Streaming/channels/2/preview returns a mjpeg stream

Nope. Hoping an eventual firmware update will make it work...

I think that mount is for solid siding (wood or fiber cement). For vinyl, you need something with j-channel. Something like this one: http://www.lowes.com/pd/Severe-Weather-7-5-in-x-7-75-in-White-Vinyl-Universal-Mounting-Block/3034223 You have to cut a big hole in the siding, through. The one...

Did you ever solve this? I'm having trouble getting snapshot from all my firmware 5.3x LTS cameras.

It's been a while, and I'm still unable to get a snapshot from my cameras. I'm using a new front end for my home automation software and it requires both a jpeg and mjpeg to function (uses jpeg as place holder "buttons" on dashboard screens and mjpeg for actual streaming). I've tried both...

SOLVED Hikvision OEM POE Gone Bad The only settings the switch have are "auto" and "never" for if POE is applied and a priority, for low/high/critical, which offloads power if the switch hits a globally defined percentage of it's total power (currently set at 95% with 370 watts available and...

SOLVED POE Gone Bad It's working fine using a tp link poe injector without the splitter, so it appears it is an issue with the switch. Funny thing is the other 11 cameras, my ubiquiti APs and cloudkey are all fine, and trying any of the 10 empty ports on the switch all result in the same...

The NVR is a non-POE model, so the cameras are powered by the switch. I'll try swapping in the power injector I have and see if the camera runs from it.

Hikvision OEM POE Gone Bad I have 12 HikVision OEM Cameras 5 dome, 7 bullet. They've been on the bench for a little over 3 weeks connected to my POE switch and working fine for the most part. I'm still pulling wire and am mostly making sure everything is working, especially the switch...

http://xxx.xxx.xxx.xxx/Streaming/channels/2/preview worked once I enabled mjpeg on stream 2. Thanks again for the help.

It appears my automation software does not support rtsp, however, a beta release does support mjpeg, so I'm getting ready to try that. Thanks for the help.

Installed 5.3.0 on one of the cameras with the same results, maybe a future update will do it.

They have 5.3 firmware on the LTS site. I'll give it a try.

I decided to go with an LTN8816 NVR with 4 WD Purple 4TB HDDs plus 5 CMIP7422-28M and 7 CMIP9532 cameras. Received them within 36 hours of ordering!!! I've got everything setup and working great - just all sitting on my equipment rack for now while I get the server room/wiring closet setup and...

SOLVED: LTS Snapshot URL Firmware V5.2.0 build 150126 I have 5 x CMIP7422-28M and 7 x CMIP9532 all on firmware V5.2.0 build 150126, I use and LTS LTN8816 NVR to manage them. Absolutely zero issues with the cameras and NVR, however, I also use HomeSeer home automation software and need snapshot...

Hello, I've been using IP cameras for just at 10 years, starting with a bunch of refurbished dlink and linksys cameras in 2006 monitored on webcamxp. Some of them are still working today, though I gave up on webcamxp some time ago. I'm now in the process of setting up blue iris with new...