Search results

Depending on the frequency in use, you might be able to use a SDR receiver. You can pick up the RTL2832U based USB dongles cheap. http://www.rtl-sdr.com/about-rtl-sdr/

You might be ok if you run 10ga as a quick search for 24vac adjustable power supplies doesn't return much. Or get a dc based camera. Voltage drop: 0.26 Voltage drop percentage: 1.08% Voltage at the end: 23.74

Have you taken a voltmeter and measured the loss? Plug in the adapter, measure the voltage at its connector. Plug it into the cable and measure again at the end. Do this with your cable unplugged from the camera. You will probably need a new power supply or a camera that uses DC. This is...

Re: HIKVISION DS-7616NI-E2 & Imporx (Huisun) v2 Does anyone have them working togethe Well, I have a International English version HIKVISION DS-7616NI-E2 on the way. Ordered from Amazon, fulfilled by Amazon. Verified with the seller it is the international version. I will of course verify by...

What nayer said.

As the title says, Does anyone have the HIKVISION DS-7616NI-E2 & Imporx (Huisun) v2 working together? I am trying to decide on a NVR. So far I have only purchased this one camera for a special application. I want to record 24/7. I would have the NVR attached to an input on the TV and could...

@nayr, do you run your cameras in a vlan or just drop the packets at you router?

Not me. For 300, I want support. For example a manual that shows the option/operation of the camera. Access to firmware updates.

It may not be a V3, but they have definitely made some updates. Look at the new pan/tilt values. Its a lot bigger also. 10X version - 153mm×93mm×130mm(L×W×H) 30X version 380mm×128mm×262mm PTZ optical zoom 30X IR distance 100M Pan Range 0°~360° Tilt Range -40°~60°...

I wish they had reliable method to obtain updated firmware. I.e a site you can go download it from.

Thats nice. Wonder how much it will be.

A PC is not required. Depending on the router you have, it may already be built in. If it is not, then there are 3rd party firmware options available for many of the popular routers that have it. Look at Tomato, DD-WRT and Merlin's builds if you have an ASUS. The best option will be dictated...

I cant tell which ports are most likely, I am just getting into the cameras. If it was me, I would load-up wire-shark on the pc you view the video with within your LAN and see what ports are actually being used. With that said, look at the camera and the software and see what ports they are...

That's what I was implying. He currently has a good reputation on this board, so the business for these cameras is going to him.

At quick guess, I would think you have not forwarded all of the required ports in your router.

In your orders section, click the track order button. Most likely it has not really been shipped yet. It was a week after the first its been shipped message before it showed up in the tracking as being received by CP. Also, 17track is pretty good. https://www.17track.net/en

Jack is getting some decent business based on this thread results. I ordered on the 11th and you can see the timelines for my order. It took a week before CP even showed receipt. This is shipping slow. United States of America Destination Country 2016-07-22 17:27:00 【 CHINA,BEIJING...

So yours died after ~ 6 weeks. So yours is making a grinding noise? Does the camera still work, ie zoom etc and you just cant pan/tilt of is it really dead. Mine just posted in the tracking yesterday. I am going to be royally ticked of if I only get 6 weeks out of it.

They probably know whats wrong with the internal POE. An easier/quicker solution is to disable or not even install the POE circuitry and include the external POE device. This way they can still say it is POE. Then respin/fix the internal POE on the next v3 version of the camera. This allows...

I believe your on the wrong forum. Why don't you ask your question here. https://www.dslreports.com/forum/dimaging

I have one on the way, ordered it last week. I emailed Jack asking if I was getting a 222 or 322 version. He just replied it was a 322. When I get it, I can telnet in and run the same commands and post the results. Is the telnet user/pass the same one used for the web app or are they using a...

Its also possible they "locked" it to their SFPs. But I would see if you can enable it via the interface first. Then I would try a version listed for it first. All they do is add an identifier to the SFP that software checks and if it is the correct code, it lets it run. What other vendors...

Take the camera out of its housing and mount it to faceplate and push the guts in the gang box. Or something like the TOP-201 might work. http://www.ebay.com/itm/Top-201-IR-H264-1MP-Super-Mini-Network-IP-Camera-Home-RTSP-TCP-IP-Night-Vision-/281719626339 If you want quality, the hikvision...

Or if you need even more power, depending on the amperage it pulls, get a 12v to 5v converter and use a larger 12v battery. Then you could use anything from a 4ah to a 100ah battery to power it. You need to verify the voltage of the original battery by measuring it with a voltmeter when it...

Well, I ordered the Huisun/Imporx mini-ptz with 10X zoom plus their POE adapter cable. Total price shipped USD $162.99. Camera was $158...

As there is no documentation for this camera, I hope some who has one can help. I want a camera that can directly stream the video to a samba share. I have an application where I need to capture some activity for a couple of weeks. Area of interest is approximately 100 feet away. I do not...