Search results

I initially had the Jan 2017 firmware on most of my cameras (I think the first 3 had the late 2016 firmware), then upgraded all to the recent firmware update. Not a single random reboot before or after any of the firmware upgrades. IVS is enabled. I have the 5216 non-Poe nvr (with 2 Seagate...

Or is it IPCamen?

ENDFILE

Connect with VPN, then a local IP to the NVR on the app.

That's his PayPal email, not his working email. Directly from his profile page here "Guys contact me at email: kingsecurity2014@163.com Skype: andy.tenvis".

When I registered, they didn't take Amex. Only Visa an MasterCard. That was earlier this year.

How would it cause overheating? Leave them in. If there is any moisture inside (air contains moisture), you will run the risk of the lens fogging or condensation shorting out the camera. May not be the case in the Sahara desert, but in the SE US where I am, condensation / moisture intrusion...

Do a search in this thread. At least one other member had to send one back. They can tell you what was used.

Use 6" pvc sewer pipe with a 6-4" reducer to put the camera in with the base, then put a 4" section on it for the lens end.

That's the part # listed for the non Poe version in your link. You need 12vdc to power the camera. Typically a Poe network switch is used to both power the camera and to add it to the network (for Poe powered cameras). Alternatively, the camera can be connected to a router or regular switch...

Makes me wonder if you added a PTZ with auto tracking and had a laser attached and sighted with the camera that would light them up (vs a red light) if that wouldn't make them think twice. A low power laser that wouldn't cause eye damage would work fine at night. Sounds like you have a lot a...

What I've done is to log into the camera with my iPad and the idmss app and use that to view from the camera while standing on the ladder. I had my laptop nearby with the web ui up to adjust the zoom. Once all was good, tighten the set screw and done.

It's cheap and easy to replace if it ever falls apart. Never used any outside, but I used this to keep my cat from chewing into electrical cords for lamps and other powered items. =)

You don't need a baseball bat nayr. One of those mags will work just fine and you won't damage the mag. I still think the "rack a round and scare 'em off" thing is silly. If someone is drunk or hopped up,on something, they won't care. Take a look at the recent shooting in Broken Arrow, Ok...

DD is about 30 minutes from my house and I have friends that work there.... :headbang: Never had any issue with steel case rounds in any caliber that I've used. Use steel for cheap range / plinking ammo and brass for everything else.

Log into the camera with the web ui, or use Smart PSS to adjust the zoom / focus once you have it set up.

If you live in a dry area, that may be fine by itself. I would call the connector water resistant, not water proof. The tape will prevent moisture intrusion in areas that are really wet or get a lot of condensation.

Did you get a polarized filter for this yet? Got mine up and running this weekend and the daytime video seems a little washed out. It's been completely clear and full sun the last few days. One other observation, the night video is ok as long as there is some light around, but very dark if...

Haven't had to do that in a while. I work a few miles away from the DHL and Fedex main locations where I live. All packages from Andy have gotten a signature, not sure if they were required. Got a robo-phone call or 2 ahead of some of the deliveries stating that I might need to sign.

Had no issues with the OpenVPN import on a iPhone 5S or an iPad Air 2. Same router, R7800.

Once the order shipped, all of the orders from Andy took 1 1/2 days to arrive at my house in the Eastern US.

Still waiting on them. The tracking info has never changed. The seller extended the buyer protection on their own a few days before it was supposed to run out (4/1), and it now expires on 4/21. Figure I'll give it until around then as that will be over 60 days from when it was allegedly...

Word to the wise, if you open one of the turrets to insert a micro SD card or to move a desiccant pack that is rubbing on the lens, make sure that the rubber seal is set in place before you put the camera halves back together. Reference for the seal, it's the flat black part on the lower 1/2 of...

The top and bottom covers (white) are plastic.

This one is slightly more expensive, but if you're looking for a higher zoom capability and even more IR light, check out the new Z5 bullet (Some excellent comparison pics in the thread). Dahua Starlight Varifocal Bullet Z5 7-35mm (IPC-HFW5231E-Z5)

Hot dog. Just checked shipping info on my 2nd non-Andy Ali order (from the sale at the end of March) and there's actually tracking info on it. Your item was collected(BeiJingShi yonganluyingyebu) at 2017-04-03 04:21:00

I got an updated dhl tracking # (on Ali) for an Andy order. Shows the package moving from the pickup site in Hong Kong Sunday, through the sort facility on Monday. Sounds like it's on track to get here with no issues from the holiday.

Read in another thread that one person pulls their camera and puts it in the glove box during the day when it's hot, the puts it back up for the drive home. It gets hot here, so I have been thinking about trying that.

Here's sort of a comparison pic. It's from the regular HFW5231E-Z bullet cam, but sorry, no snow! That's a foreign thing where I live. =) Dahua Starlight Varifocal Bullet (IPC-HFW5231E-Z)

Just for the fun of it, here's the DHL guy delivering an Ultra Bullet this week. The pic was taken from one of these 2mp Starlight bullet cams. It's on full wide angle until I swap it out from this location with either the Ultra or one of the new Z5's (overwatch of the mailbox / street).