Search results

  1. P

    Hikvision Permanent Region Change

    Does 5.3.0 include the extra detection options, such as face detection etc?
  2. P

    Hikvision plug in

    I found it best to use Firefox.
  3. P

    Setup options for remote viewing?

    With my phone, I get a choice. Clear, Fluent and Balance. When I select Fluent, most of the time I can view the live footage. This is not so much the issue, The issue is I can not view the motion footage recorded away from home. I want to be able to view the motion footage away from...
  4. P

    Setup options for remote viewing?

    I found it easier to remotely connect to my cameras web interface by using a POE switch instead of the POE ports on the NVR. The IVMS4500 app is not working to well for me on my phone, I beleive to upload limit on my Internet is the culprit here. Phone is on 4G right now with fast connection...
  5. P

    Setup options for remote viewing?

    Just to clarify my setup.. I own a NVR DS7608NI-E2/8P. Firmware 3.2.1 6 Hikvision cameras connected via a POE Switch, I am not using the POE ports on NVR
  6. P

    Setup options for remote viewing?

    Whats the best option to adjust the cameras on a Hikvision NVR? From the following 3 methods. 1. Cameras own web interface 2. Hikvision NVR 3. Hikvision NVR web interface Prior to leaving home for my holidays I cconfigured the camera settings including motion detection with the NVR...
  7. P

    Hikvision NVR new firmware 3.2.1

    Hi, have you started the new thread, I am having issues with live view on my phones ivms4500 app and recording on the NVR.
  8. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Thanks hereu. The alarm notification on the phones app is a no go. What I have had success with is the email notifications. There are a couple false alarm emails sent with no motion on them, I checked on NVR and there are no recordings for that time the emails where sent. On a whole it's...
  9. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    I'm keen on getting this setup, as I'm going away on holidays for some time at the end of the week. I am contemplating on another method while I am away on holidays to monitor any activity at home. I installed a Western Digital 4TB Purple Hard Drive in my NVR. Thinking about setting this...
  10. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    There is a couple other issues, but fairly minor compared to not having any access away from home. I can not get the Alarm Push Notification to work on my Apps. I followed all the instructions to get this to work, but nothing will. I want some kind of notification sent to my mobile phone...
  11. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Thanks Chris. Your settings worked. I don't need to set a DDNS, My ip is permanent. I have one more camera to install out the back, I can get onto now that this appears to be working as it should. I never known you could set a separate port range to the local port on my router, I always...
  12. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Thanks all, I been trying to work it out for hours today, best part of the day. I'm a bit tired and exhausted now. Going to get some sleep and try it again in the morning. Thanks for the advice. I tried forwarding port 8000, that did not work for neither the Phones App or the NVR web...
  13. P

    Hikvision NVR new firmware 3.2.1

    Hi, Sorry I not been able to find such a feature on mine. All I can find with cloud on it, is some EXVIZ Cloud Server supplied by Hikvision
  14. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    As you can see my Router don't have a area to key in the incoming port as your router shows. Maybe I need to change the Ports on the NVR? Would that work? I'm under the impression that it's not advisable to change the ports on the NVR.
  15. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    yes, thats what it looks like
  16. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Hi, I don't know how to do this on a Asus Router. I can not find an option for inbound port and Private Port in the port forwarding on the Asus Router. Best I've been able to do is change the HTTP port to 5000. Which gives me access to the NVR web interface from a device away from network...
  17. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    I'm still having problems setting this up. I'm stuck at the port forwarding step.
  18. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Huge improvement overnight with motion detection on my NVR. Up-to two nights ago, I was receiving constant motion recordings, particularly worse at night because of the bugs flying around. Living up here in QLD, in particular with this warm humid weather we are receiving of late, there is...
  19. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Thanks chrstodav, the motion detection is now working as it should. It appears having the Motion Detection set on the Camera and the NVR is not a good idea, the two clash. I have a couple other issues. Email is one, I will look into that tomorrow. The other issue is my 2432 camera will not...
  20. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    I had to use SADP individually on each camera, changed the IP address to match the range on my router to gain access to the cameras web interface. I turned off all Motion settings in Camera webs interface. Using SADP I changed the IP address back to the ip range compatible for the NVR. I...
  21. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    I went up town and purchased a monitor just for my NVR. I'm going to connect to my cameras now and remove all the motion detection settings now. I will let you know how I go with this.
  22. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Yes, I had some difficulty finding your post, eventually I realized it was on this very topic. :) As far as I can find out the firmware is not available thus far, unless you purchase a NVR with the firmware included. I been keeping an eye out looking for it, in particular the firmware...
  23. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Hi, thanks for the advice, No I did not see your thread on the subject, it sounds like it's just what I need. I will search and find your thread now. Yes, I understand what you are saying here. I innitailly also configured my cameras via the web interface before I changed the IP address...
  24. P

    HikVision DS-7608NI-E2/8P - some pics and first impressions

    This is not all, I heard a rumour and seen evidence that there will soon be a new firmware released with all the extra option for motion detection as you see on Firmware 3.2.1. The firmware is 2.5.6 Take a look at Hikvision Home Page and click on for example the product page for the 2332i...
  25. P

    HikVision DS-7608NI-E2/8P - some pics and first impressions

    Here is a screen shot of the web interface for my NVR. Showing 3.2.1 firmware. I was wondering why it was taken someone this long to have noticed this. I mentioned it somewhere here on the forum a week ago, but no one quoted on it or even queried. The only problem for me, is I don't know how...
  26. P

    HikVision DS-7608NI-E2/8P - some pics and first impressions

    Yes, for real. I own one with Firmware 3.2.1 installed. The same day my seller was due to post out the NVR to me, he sent me a message saying that a new NVR just arrived, a matter of hours before he was to post mine out and asked if I wanted one of the new stock that's just arrived with...
  27. P

    HikVision DS-7608NI-E2/8P - some pics and first impressions

    I will be leaving on holidays within the week, I will wait on my return and do the mod to the fan on the NVR, as there will be no one here to complain about the noise. In regards to this NVR, mine arrived with firmware 3.2.1 and I'm having great difficulty in setting this up to work as it...
  28. P

    HikVision DS-7608NI-E2/8P - some pics and first impressions

    Yes, that's the correct P/N. I had the same idea with installing two fans, one on the other side of NVR drawing air in and one above PSU drawing air out.
  29. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    One more question: Should I have the IPv4 address of the NVR set to the same range as my cameras? For example my cameras are set at the port range of 194.168.254.*** My IPv4 on NVR is set to 192.168.1.201 Should this be in the same range as the cameras?
  30. P

    Help needed setting up HikVision DS-7608NI-E2/8P

    Hello all, My NVR arrived in the post 5 days ago and I am struggling to set it up. I had great difficulty getting the POE ports on the back of my NVR to recognize my cameras. After a full day off failure, I connected the cameras to my POE Switch and plugged a lead from the switch to the...
Top