Search results

  1. B

    BI Log: 'live.sem stuck'

    I'm currently running 5.8.0.14. But it was also happening on earlier versions I ran 5.7.42, 5.7.7.18, 5.7.9.4 and possibly some more. I've done all the recommended things, sub stream, no hardware acceleration, no moving clips about etc. CodeProject is running on the host Linux pc, not the Blue...
  2. B

    BI Log: 'live.sem stuck'

    I've been getting the same error message intermittently for at least 4 months and probably a lot longer. Blue Iris is running in a Windows 10 VM that is blocked from the internet. Randomly Blue Iris uses 100% CPU for a long time, maybe 2 - 3 minutes and occasionally longer, which locks the pc...
  3. B

    New Reolink Wired POE Doorbell Cam ?

    I don't know if it varies with the version of Android but on my phone if you open the Settings option of the Reolink app, not the Settings for the doorbell, you can change the Notification sound and it's associated Notification settings ie vibrate etc. I've changed mine to a much louder sound...
  4. B

    Bricked SV3C IP 1080P Firmware help

    Luckily I had a second working, identical model camera. I unsoldered the flash rom ic from it and read it using a C341A flash programmer. I then unsoldered the flash ic from the bricked camera and flashed a copy of it to the flash ic. After resoldering the flash ic back in to the bricked camera...
  5. B

    Bricked SV3C IP 1080P Firmware help

    I don't know. Hopefully someone reading this forum has the same camera and is able to provide them for you.
  6. B

    Bricked SV3C IP 1080P Firmware help

    The files I have are for the SV-B01-POE-1080p non wifi model, which is different to your camera so they will not be correct for your camera.
  7. B

    Bricked SV3C IP 1080P Firmware help

    I've sent you a message with the files attached.
  8. B

    How To Obtain Device Verification Code?

    I've tried ABCDEF and it gives a message along the lines of "Code is not secure enough. Change the code and try again". Trying other codes gives a "wrong code error". Unfortunately the doorbell web UI doesn't have the Network / Advanced Settings / Platform Access menu option so I'm unable to...
  9. B

    How To Obtain Device Verification Code?

    I have a Hikvision DB-120A-IW (DS-KB6003WIP) doorbell. I have connected it to wifi and I can log in to it's web interface and it is also connected and working with my Hikvision NVR. I am trying to get it to work with Hik Connect but to add it to Hik Connect you have to input the Device...
  10. B

    Bricked SV3C IP 1080P Firmware help

    I've sent you a message with the files attached.
  11. B

    Bricked SV3C IP 1080P Firmware help

    Today I flashed the individual mtd files to my second camera, which was fully working and had the later firmware on it. This time they all flashed first time without any errors or the USB to serial adaptor locking up. I rebooted the camera after flashing them and it booted up correctly with the...
  12. B

    Bricked SV3C IP 1080P Firmware help

    Sorry to create all that work for you and I really appreciate you doing it. I can understand why you didn't want to leave your password in the file as I am also very wary of giving my passwords away. But if your camera is blocked from accessing the internet, which it really should be, and you...
  13. B

    Bricked SV3C IP 1080P Firmware help

    Thanks for taking the time to write such clear and detailed step by step instructions. Especially the bit about how to leave the Rx line connected while shorting the Rx and Tx lines together. I really should have thought of doing it that way! I followed all your instructions but had a problem...
  14. B

    Bricked SV3C IP 1080P Firmware help

    Genius! I would never have thought to try that. I shorted the Tx and Tx lines together and turned on the camera and it booted as normal. I tried shorting the Tx and Rx lines together as soon as the "Hit any key etc" message appeared and it still booted as normal. I then disconnected the USB to...
  15. B

    Bricked SV3C IP 1080P Firmware help

    The camera pcb has the Tx and Rx pads marked, so I'm pretty sure I have them connected correctly. I did try reversing them and then there was almost nothing showing in Putty and what did appear was gibberish. Also if I type what I type appears in the Putty window but the code below keeps going...
  16. B

    Bricked SV3C IP 1080P Firmware help

    I've connected to the internal pcb serial header using a USB to TTL serial adaptor and Putty shows the information as the camera boots, so I've connected the RX and TX leads correctly, but I cannot interrupt the boot loader! I've tried Ctrl c, Ctrl C, Ctrl u, Ctrl U and lots of other...
  17. B

    Bricked SV3C IP 1080P Firmware help

    I'm pretty sure yours was a different issue. It sounds like your password, or IP address, had been changed. I had tried the software that was available on the SV3C website "Product Tool for POE IP Camera", which should be the equivalent of the "A J Device Tool" you used, and that was unable to...
  18. B

    Bricked SV3C IP 1080P Firmware help

    As well as keeping a copy of the working flash rom with firmware V2.3.4.2103-S50-NTD-B20170823B I also kept a copy of the bricked flash rom after I used the Product tool to flash it with the earlier firmware V2.3.4.2103-S50-NTD-B20170508B. Doing a file compare I found that the first area of...
  19. B

    Bricked SV3C IP 1080P Firmware help

    Attached is the copy of my flash rom. It may set the camera to a fixed IP address of 192.168.254.5 but if you use the Search tool you should be able to find the camera and change it without having to mess around with your network and computer IP addresses.
  20. B

    Bricked SV3C IP 1080P Firmware help

    See my previous post reply for links and more info. If that is not enough what more info do you need?
  21. B

    Bricked SV3C IP 1080P Firmware help

    Attached is the v1.29 I used. I only used it Sandboxed as AVG thought it had a virus, but AVG often has false positives. Use it at your own risk. These websites have more information and links to versions of the software :- CH341A Mini Programmer Schematic and Drivers · One...
  22. B

    Bricked SV3C IP 1080P Firmware help

    Hopefully this information has not come too late and will be helpful. Today I successfully unbricked one of these cameras by using the C341A Flash programmer and program v1.29 to read the MX25L6436F ic removed from a working camera and flashing it to the ic from the bricked camera. The bricked...
Top