Search results

Fenderman: Thanks! I think I'll try Ispy on my least problematic PC and if it's stable I can see how many USB cams it can hold, I would use no more than 3. Take care, Bill

I am having a problem with 2 screen capture filters posing as USB webcams (devices) and upsetting the use of these cameras. The two bad guys in this plot are: USScreenCapture and Byte Scout Screen Capturing Filter This is on two different PC's. I first noticed this with a program on a 10...

Thanks for that information. Have a nice day, Bill

Okay, I will check into that. Thanks for this post to me I appreciate it!! Bill

Mrgto26: Thanks for the tip. I got inside the cam and disconnected 2 wires inside which seemed to work in daylight but now at night only the camera view totally breaks up into a pixelated mess. How can the camera know it is dark out without the night IR sensor in use? Thanks, Bill

Fenderman: Came back here this morning to the PC and launched ZViewer it had a good image from the Zmodo and then launched BI and it also had a good view from the Zmodo. So will let things sit like this for awhile. Thanks for the port info. I did learn a lot yesterday in a trial by fire kind...

Not so great - I went back to see if I could get the image back on the ZViewer and re-added the device which came up okay but then it knocked it off the BI cam view. Back to "no signal" problem. It showed a new IP name which I had also changed on BI but that did not help. Will mess with it...

Fenderman: Your idea was right on! I didn't think the Zmodo settings would carry over to BI but now the view is clear of that clutter. However I found out the IR lights are on full tilt and wash out the night sky view so I am going to explore ways to deal with that next. Thanks, Bill

Hi: My view had 2 time-stamps on the bottom and top right. I was able to delete the bottom one via the instructions in the help file but the upper right one does not become active with a right click or any other kind of click/delete. How can I remove that final time-stamp? Thanks, Bill

Fenderman: Update/ Hello. I made some minor setting changes in my router pages mainly for the ZViewer aspect and along the way I thought I would launch BI to try and get a USB cam I have hooked up to it then I saw the Zmodo image on the screen. Anyway it seems stable for now, I did some testing...

Thanks for doing this!

fenderman: I found out in the online manual for the cam they give fairly detailed info on all the port information. The cam is still working well off the ZViewer app. I will be going back to work Tues through Friday my only free time is after 8 p.m. or so until midnight. Take care, Bill

Great information! All I need is a 60 ft range through one brick wall and down a 30 ft angle. Once I get this set up with BI I think my range will be okay. I have a high end router and plan to get a Amped Wireless High Power 1000mW Wi-Fi Signal Booster (SB1000)In this high stressed high...

Thanks fenderman: The settings are very few with the default app. I was thinking of a tiny black-coated fiber optic light shining into the night sensor... Perhaps I can pop off the front lens and paint each IR light with heat resistant black paint. But then again the smaller plain 720 IP cams...

I am in need of a way to turn off the IR illuminators on my ZModo IP cam, a ZP-IBI13-W model. Since there is no independent cut-off switch can this be done through any software or perhaps cover them with black felt so only the camera lens records? Or clip the wires inside, etc. I no longer...

Thank you for that update it is very useful. I am looking for cheaper options also as I need a IP cam at 720p (or better) that is not loaded with any IR illuminators. Take care, Bill

fenderman: Hey that would be fantastic if you could do a teamviewer session! I am in the CST timezone and largely available all day today Monday Feb 16th. Just let me know what times you are thinking off. Should I send you my email in a private message to help communicate? Sincerely, Bill

One of the things I need to do is learn how to configure the camera through the router so I am not assigning ip address or other addresses to the camera yet but I know them from a IPSearch program that ZModo offers that shows a whole list of address info, etc. related to the camera. However my...

fenderman: The image was stable for like 2.5 hours while I was out for a bit but then crashed once again. I did get the ZModo web viewer going okay so I an see thyat inmage but when I unhook the E cable the image drops again. Here are 2 screens on the video/network settings views. Thanks, Bill

fenderman: Thanks for your reply. For testing purposes I have the camera ethernet-wired just 3 feet from the router and the pc. On the camera's box there is listing for 3G and 4G along with Wi-Fi but I suppose that means off-site viewing? So the W in the camera's model number indicates it is...

Thanks for this information. I have the ZP-IBI13-W and used most of these settings to get the cam to work but then a few minutes later I lost the signal. That error message has it at: 2.50 fps, 993.32 kB/s. with a yellow ! flag. I went through most of the major resolution settings to see if it...

Hi. I found out the Ali Express site does not take PayPal so I found a similar camera on EBay. Does this seem a suitable type camera? Not sure of the sensor however. Let me know what you think. Link...