Search results

I got a brand new DS-2DF5286-AEL from a US seller on ebay. According to hikvision, it should have smart features, but I don't see them? https://www.hikvision.com/content/dam/hikvision/en/support/regional-materials/africa/DS-2DF5286-AEL%20-%20Cebraspe.pdf Smart function:  Smart tracking modes...

for future référence, it’s a jst ph connector - meaning 2.0mm spacing. The cheapest I found was in AliExpress for $4 for a set of 20 (most others I found were a set of 100s)

I found some connectors on eBay, but wasn’t sure if this connector is 2.54mm or smaller. The image you show link to 2.54mm connector, is this the correct size for the doorbell connector?

thanks, you are right. Sometimes the obvious solutions just infront of our eyes while we are looking for à complicated way out. Any idea where I can buy this plastic connector? It might be a good idea to preserve the cable if I move in the future.

So I was able to add to the NVR by updating the firmware of the NVR. now I have another problem - the LAN connector is too big to fit the frame of my door. I want to cut it out and connect it directly to my LAN cable. I am not worried about water since It will be tucked inside the door/wall...

Exactly what I have - I can find it, add it, but it never turns green. I even created a second user account to test with - no go :( At the same time I have no problem with the Config tool and idmss app as IP cam ... WTH?

Update on: 1. I reset to default, searched and found on the default IP (.110) as Private on port 37777, and still cannot add it?????? I can add it as camera on port 37777 from my idmss app and is working great from the app. 4. I fixed it by adding subscription as per Dahua Wiki

1. I will give it a try. 2. No VTH. It will replace my current doorbell, so I was hoping I would be able to wire it somehow. I saw a hack somewhere, but it involved using the WiFi, not the POE. 3. I was thinking more something like when I press the unlock button, it would walk to my Samsung...

Looking to trade for equivalent Thermal camera (might consider other equivalent trades) Only used once to test the LPR at my parking. Worked flawlessly, but I don't have a garage to control the access to, so I have no real use for it...

I just got a new VTO2111D-WP, and am tying to set it up. So far: I can access via ConfigTool I can access it through the Web browser by IP I can add it as door bell on iDMSS Plus app and can talk and view I want to: 1. be able to add it to my NVR (I have 8 channel Dahua with my 5 other...

I just got a new VTO2111D-WP, and am tying to set it up. So far: I can access via ConfigTool I can access it through the Web browser by IP I can add it as door bell on iDMSS Plus app and can talk and view I want to: 1. be able to add it to my NVR (I have 8 channel Dahua with my 5 other...

I forgot to add that it happens both on iPhone and Android

So I got a Dahua fisheye with built in audio from Andy, but I have the following issue- if I use the web browser, the audio is working fine. However, if i press the Microphone icon in the app, I get an error: •failed to enable two way audio• I am connected DIRECTLY to the camera (not through...

What a shame! It seems too much of a hassle for a DC. Is there a way to install it using some sort of 3G adapter to be able to access it remotely?

Does anyone know where I can get the latest firmware for ITC237-PW1A-IRZ (and up-to-date user manual). It currently has: Hardware Version1.00 Algorithm VersionLibits:Dec 13 2016 09:06:26 1.0.38782 Radar Version Software Version2.202.0000.1.T, build : 2017- 3- 7 Soft Build Time2017- 3- 7...

hmm, after reading a bit, the problem could be that the camera is not getting enough juice. I will try with 24v power adapter.

I got my hands on a second hand SD42A212TN-HN, but the P and T functions do not appear to be working. The zoom/focus work great. I tried both through the Webpage and through the NVR - no go. It currently has the 2.600.0000.0.R.20170601 firmware. I tried upgrading to...

What is the cheapest option to connect an existing BNC PTZ cam to (dahua) NVR? It's 1080p, and I want to be able to control the PTZ from the NVR. I found some axis video servers (e.g. 241s, 2400), but they do not seem to support 1080p. Thanks

Mod, can you move the thread to the LPR forum? Just to be clear, I am not trying to do recognition; only capturing in case I need to go back and check. I guess the problems is that it's overexposed and quite noisy (I will post some samples later tonight) Unfortunately, the web interface has...

I am having hard time capturing license plates at night on the street in front of my house. Need some advise. During the day I have no issues - capturing is crisp and legible I am using a q-see qtn8039b bullet, zoomed all the way through - the distance between the camera and the cars is...