Search results

Im not sure there is possible to manage the Doorcam thru web interface? I suspect wifi incompatibility causes your problem (as in my case)... After the first setup the Wifi on my Doorcam setup it chooses to use WPA1 (and not WPA2) at least in the BCT settings for the Doorcam. (And according to...

Im not sure there is possible to manage the Doorcam thru web interface? As per my post 7th of March. Your description is exactly the same problem I got with the latest firmware on my Hikvision DS-HD1. I have tried two different routers (and 802.11 2.4 / 5) setups. I suspect wifi incompatibility...

Hey! Have tried to shorten the PWD as well as only using 2.4 since I had the same idea as you its not the first time a wifi device have problems with "newer" wifi standards. Connectivity to the Wifi works though, its just the install process is not 100% finished (with the last importat...

Hi! Really appreciate your response and help. Yes, the Doorbell setup works although not 100% finished as described and as shown in the product video link. After the setup, I am able to reach the Doorcam thru IP and the Hikvision tools and can configure Wifi / IP and other settings. I...

Hi all, anyone watching this thread experienced this and can help me? I got a Hikvision DS-HD1 Doorcam and I have applied the latest Firmware: DS-HD1_5.2.4 200321 My main problem: When setting up the Doorcam, I cannot configure the Doorcam settings from the Hik-Connect app, the error message I...

HI all, I hope someone can help me with this problem. I got a Hikvision DS-HD1 Doorcam and I have applied the latest Firmware: DS-HD1_5.2.4 200321 My main problem: When setting up the Doorcam, I cannot configure the Doorcam settings from the Hik-Connect app, the error message I receive is...

Hi all, thank you for all the nice posts on the forum. I have been curious about how people extend (or connect) to the flying leads from the camera when the cable is missing a pigtail. Would be very helpful if you would be able to give your idea / example...

Old thread, thought someone reads it and needs help :-) Read the PDF. Here are the commands that worked for me: http://XXX.XXX.XX.XX:XXXX/ISAPI/System/IO/Inputs/1/ (TO retrieve XML). Copy paste into a text edit and save as XML. To send the XML file to camera (with CURL is this example): curl...

Hi Fastb! Much appreciated, thank you for your response! I dug around some more and found the manual (stupid me not looking into that first). Manual mentions 12V 5 A Power source. Im not 100% sure on how you can get 400W out from that but maybe someone more knowledgeable than me may explain :-)...

Hola Fastb (and all)! Trust all is fine! My first post in this Forum. Hope someone of you can help me with an answer :-) What kind of power Supply did you use (since its 400W speakers the Ampere must have been high enough)? Thanks in advance, Sincerely Joakim

Hola Fastb! Trust all is fine! Regarding the thread: https://ipcamtalk.com/threads/poe-camera-speaker-ideas-and-help.16007/ Hope you can help me with an answer :-) What kind of power Supply did you use (since its 400W speakers the Ampere must have been high enough)? Thanks in advance...