Search results

fenderman, I made the adjustments you suggested in items 2) and 3) above and it did not affect the problem. However, when I started looking at the "keyframes" subject in item 4) it opened up a large area of subject matter that I am not familiar with. In searching the BI Help files for...

OK, thanks fenderman, I will work on that. Duane

Ok fenderman, here are some images of my camera locations and Blue Iris settings along with examples of triggering/no triggering: The upper right (corner cam) and lower left (shop cam) are wireless cams connected to the BI PC in the house. The upper left (Garage cam) and the lower right...

Thanks fenderman I will work on that tomorrow. Also, l am not using any profiles. Duane

Thanks fenderman

Just to clarify my problem. I have three cameras on the outside of my house, all connected with ethernet cables to my pc and Blue Iris. I also have a shop building about 120 feet away from the house which has two cameras and these are connected back to the house using a wifi link, a pair of...

Thanks for the reply looney2ns I make a mistake in an earlier response. The Speco cam is on a wifi network but the Nelly cam is on the ethernet network. Both of these cameras exhibit the same problem. This is why I believe the problem is associated with the Blue Iris Motion Detection side and...

Thanks for the reply looney2ns Camera 1 is a Speco O4VT1M 4Mp, FPS is 15, iFrame is ?, cannot find it on the Speco camera configuration settings Camera 2 is a Nelly's NSC-2X4G-DM 4MP, FPS is 15, iFrame is 15 I usually keep my camera FPS and iFrame set to 15 Cars are entering and exiting a...

I have a four outdoor camera network at my home. The cameras are connected to my Windows 10 PC with a router and ethernet cables plus wireless network. I am using Blue Iris V 4.8.4.3 to manage the videos. Two of the cameras are viewing the roadways at the entrance to my home and at a corner of...

I've been using this webcam configuration below for several years now. There are four camera shown at the bottom of this diagram. It took me some time to get the "Shop cam" working reliably but this network is basically "ok" at this point. I am somewhere between a beginner and intermediate as...

Thanks Boristheblade, I found it this morning and have it downloaded and working. Thanks to the others for their interest and replies. Duane

Thanks fenderman, glad I'm not out to lunch on this. Now I'll have to figure what to do next. Duane

I cannot find the Blue Iris android app on the Google Play Store. I have the version from several years ago on my old android phone, but am trying to install the same app on a new phone, a Pixel 4a with android Ver 11 system software. When I go to the store and search for "Blue Iris" it does not...

Thanks for the reply SoutheryYankee, for what it's worth I've attached my network diagram. The connection I am troubleshooting is between the Netgear EX6200V2 and the Hawking HPOW5. I get it working sometimes with a good signal but later it justs drops out. So, I know my network IP addressing...

Thanks for the reply Mike A. There is a lot I don't know about TCP/IP so am just trying to solve a signal path problem. I will keep working on it. Duane

I have a remote cam setup using a wireless repeater and a wireless bridge. My connection to the cam keeps dropping out. When I hook up the bridge and a test cam in the house everything is ok. When I go the remote location and connect the bridge and remote cam everything is ok and I can ping the...

SoutherYankee, thanks. I changed the EX6200V2 SSID to the same as the home router during the initial setup based on other advice, but I can change it back to a different SSID I am sure. Not so sure of how the remote shop cam/access point will respond, hopefully I can change it also (these are...

Thanks alastair for the reply. I have been looking into that. I speculate that if I can setup my extender with a different SSID than the router, then see if I can get the shop cam access point device to respond only to the new SSID, that should work, right?

I have a home webcam setup (four cameras) which includes a Netgear R7000P Router and also a Netgear EX6200V2 Range Extender used to reach out to a shop building about 150 feet from the house. Some times I get intermittent dropouts from the shop webcam and I suspect that it is connecting with the...

It changes the Internet Explorer "Settings" to allow ActiveX settings to deal with the Hikvision "WebComponent.exe plugin. Beyond that I have no clue. Duane

Problem Solved! I contacted the camera supplier Nelly's, at Nelly's Security - The webs top source for New Security Cameras, Analog Surveillance Systems, and High Definition IP Systems. - Nelly's Security, and talked to Tech Support, Amair Ahmed. Amair was able to walk me through the steps to...

I "think" the WebComponent.exe" file is the installer but when I double click to execute or "Run as Administer" it runs, has a window to show activity, ends with the window saying "Setup has finished installing Web Component on your computer. Click Finish button." But nothing has changed, the...

Thanks Alastairstevenson. I used Internet Explorer V11 and went into "Manage add-ons", not somewhere I've been before, but do not see any thing that looks like WebComponent or from HikVision. I do see something from D-Link and Shenzhen Foscam that must related to some other cams I have used but...

Thanks Securame for the reply, but that does the same as the other browsers. Duane

I have two Hikvision cameras that have worked very well for years snd I have got along without being able to see "Live View" on the cam settings. I just got a new Hikvision cam, Nelly's NSC-2X4G-DM, and again am not able to see the Live View but am able to log into the camera and use the...

Hi Cyborg10, this is EganMontana. I started this thread. If you read all the responses in this thread you will notice that I did not solve my problem until reply #16. This was the second time that I had uninstalled the app and went back to the play store, in my account, and downloaded and...

Alphawave7 and fenderman, you were right, the simplest solution is often the correct solution. I uninstalled the app on the new phone and reinstalled it again on the new phone. The BI app works correctly now. Thanks for the assist in troubleshooting. Duane

Ok Alpha,:) I get it now. As for the starting from scratch, I think I had a good installation, i.e., the BI app loads and starts. I had "cleared the Cache" but did not clear the data, I figured that the stored data referred to IP login info and such and I did not want to reenter since I was able...

Sorry alpha, you're talking over my head, i.e., Sammy's??, ...things from scratch?? I don't think I talk to language of this outfit. However, I do catch on to some things that go slow enough past my old fashioned brain. Duane

Alphawave7, The old phone is a Motorola Moto X version 2013 with Android 5.1. The new phone is a Motorola Moto X Pure, version 2015 with Android 6.0 Duane