Search results

Next time send Andy a private message and you will have you order in 3-4 days via Fedex. Two orders for me “China to lower Southwest Australia 4days”

There is a arming schedule for white light with firmware from Perth Security under Basic Event / White light settings. However I don’t recommend this firmware. Time duration on is set via the linking method This link details it setup.

OK so the model /type is DS2CD-3T-20D-I3 When connected to the NVR and you access it via virtual host did it open a new log in page. If so what was the error on log in. The last time you opened its login page was the user and password the same as the NVR now?

When its connected to the same router via POE as your computer can you see it with the SADP tool.

Indeed, lightning does strike twice Resetting IP address on bird box camera Problems generating new password Trying to reset my password Problems live streaming bird box IP camera Cannot get IP camera to work Cannot log into my IP camera Hikvision camera admin password reset tool Looks like you...

You have two threads on the same subject and paid $560 for it second hand. When the same model sells on Ebay au for $190 second hand.

I have used two DS-7616 NI NVR’s from Ebay AU.That label is not the same as I have. Do a google search for the model number should have two SATA bays up to 8 TB each?

When I checked late last week latest firmware on the EU portal was NVR_K51_BL_ML_STD_V4.40.017_201124, on checking again to day it still is. However I have found nvr_k51_bl_ml_std_v4.50.000_210125 firmware that you referred to on the UK portal. Have installed this and defaulted the NVR to...

PPPOE &UPnP is off in all cameras NVR and all of my other hardware

Been there done that. Lost count of how many times.

Late December 2020 I did posted about this conflict in the “Initial review of the DS-2CD2347G2-L(U) ColorVu 2.0 IP camera” thread as one of the cameras is a DS-2CD2347G2-L. From Andy. In order not go off subject in that thread, have started this one. @ EMPIRETECANDY Andy are not suggestion that...

Thanks for the details. I have a DS-2CD2347G2/L camera and your high speed 4k night capture exceeds my camera night time vision due to motion blur, as I am unable to increase f/p above 30 due to street lights flicker. However your capture made me review my own settings and by increasing the...

Good night time colour picture, what’s the camera model ?

I read this as you have pissed Hikvision off by not sending correct details. However they don’t support end uses normally. You now have three open threads on this subject and they are also link by an IP address to your bird cage threads which have streamed on line. Have your camera’s been...

SADP will find the cameras plugged into the NVR POE ports if you connect a PC/laptop to a unused NVR camera port Hikvision NVR POE ports are only for one camera and should not be connected to the Lan. Regarding his working camera. My understanding is he has it working via POE injector but not...

Disregard what I said for the IPC-D121-M IP 192.168.254.8 Camera. As you have now swapped over to a IPC-B120 Camera. If you know the existing password your friend should get then on line for you. Good Luck.

Is the DS-2CD3T20D-I3 IP192.168.1.123 camera online ?

That camera has the address still when it was plug in to the back of NVR. Plug it into a POE port on the back of the NVR. Connect a PC to a spare POE at the back of the NVR and rerun SADP report . Post the Image so we can see the results. I also need to know what the IP address is for the POE...

My last post was for the 192.168.254.8 camera which you need the password the camera had before you reset the NVR to defaults. This is only for the new camera which you know the password for and activate via a POE injector. Set it up the same way again connected to your router. Open your NVR...

Cameras still have the old Password. You need this in order to reset then.

Guessing here you reset the NVR to defaults because you didn’t know the current password. Don’t have a HiLook recorder or cameras but assuming they are similar to Hikvision gear can you open a camera management page as per the attached image. 1. If so one of the D* ports should have a IP...

After testing custom firmware from Perth my advice is if you don’t need the white light trigger don’t upgrade pass 5.5.150_200927. As this may delay line crossing and intrusion detection's triggers when the target is traveling across the camera face by up to three car lengths. Disabling the...

Question regarding DS-2CD2347G2. Camera firmware used. IPC_G3_EN_STD_5.5.134_200430 IPC_G3_EN_STD_5.5.150_200927 2nd Gen ColorVu_V5.5.134_201014 (from Perth Australia security adds white light trigger on detections) NVR DS-7616NI-I2 & DS-7608N Between 6 PM and 6AM. I record...

That's correct. Just recheck the camera. Have used firmware V5-5-150_200927. With the G2 can you trigger the light only when there's a smart event ?

I also have a DS-2CD2347G2-L which was purchased from Andy. This had V5.5.134_200430 firmware and the same issues that Alastair has reported with his initial review. I activated this by plug and play to a DS-7616NI-12/16P V4.40.016_200803 NVR .. The G2 connected and started a conflict war...

On the other side of Australia we just closed our land and sea borders. Had no full lock down. Or community transmission since 11 April. 11 March World Health Organisation declared COVID-19 a pandemic. 16 March Gatherings of more than 500 banned. National Cabinet 16 March...

Spanish flu pandemic of 1918 - 1919 USA with a population of 104,514,000 had a death toll of about 675,000. Adjust this for today’s population 330,811,000 are you going to thin the USA herd by about 2,025,000. Base on New York toll of 1500/1M Pop deaths you are heading for a least 495,000...

Is 42,500 deaths fake news. It needs legs to infect the next victim.

x Look’s like you had a bad start here. I don’t like to see anyone locked out off security cameras. With your help Alastair and others here will get your cameras back on line for you. How about we start with a picture, of the front and back of your recorder and one of the password screen. For...