Search results

Yes, you can. John

My VTO3211d also kept stalling at 50%, and the suggestions in your quote above also did not work for me, and then the suggestion is serial. But why use serial (taking the VTO off the wall, fiddling with wires to the RS232 connector, etc.) if there is a much easier way: Dahua IPC EASY...

Not sure about the PFA139 you refer to, but the PFA137 would definitely fit a 5231-ZE and Andy has them in black.

Also curious about real world experiences. From what I have read, the VPN speed of the Blue Cave is low / not as good as AC68 due to the cpu used.

Thanks Andy. Had to try it out.. In this version the automatic change between day and night settings can be selected (like in 2.640 180523) and the camera's video stream is shown in the camera's webbrowser. Yeah!

Hi Bryan, welkom!

You can just type it in if my memory is correct: \\NAS\storagedir (double backslash ofcourse before NAS, but this does not seem to work in this editor) It is recommended that you store recordings on a local drive (but I have been storing on a NAS without problems so far)

Your SIP firmware is for the 3221 and not the 3211. Although Google does not help much in finding out what device the 3221 is, this also surfaced earlier in this thread.

My VTH5221D (without the W) runs with normal POE

I found it at archive.cop-eu.com: Index of /Firmware/Dahua Firmware/Baseline Firmware/VDP/VTH5221D/Previous Versions

I do not think that that firmware is newer. Although it has a newer date stamp it is V1.000 and yours is V3.200 (and probably multi language) John

See attached:

See @Steff at #117 in this thread regarding the need of a VTH. But have you checked with P2P? You have a newer firmware than I do... I bought the VTO from @EMPIRETECANDY and the VTH at a Dutch webshop John

I have a few... Others have said that you will need a VTH to get push notifications from the VTO3211. Not checked it myself because I have a VTH5221D connected (which indeed works with the VTO3211). I can get push notifications in idmms plus but only if I use the P2P connection. Have not yet...

It makes the backlight in this area look blue instead of a white tint. If the backlight does not turn on at night, increase the value at local config / sensor (mine is set at 50). Took me a while to figure this out... John

Still testing the VTO. Intended use is as second frontdoorcam at face height + video intercom. Blue Iris records it, so that part is completed. Intercom function with VTH is working. To do: Looking at the push notifications but I would like to avoid the P2P part. Trying to integrate the...

Hi all, I really need to say thanks for the excellent information on this forum. After visiting the forum a few times in the last few years I registered when it was time to replace some ageing Hikvision domes in my Blue Iris setup. Very glad I did! Based on the excellent reviews by @nayr and...