Search results

Thanks. Agree. After a more thorough review of HR3919 bill and FCC action (see List of Equipment and Services Covered By Section 2 of The Secure Networks Act or https://docs.fcc.gov/public/attachments/DA-21-309A1.pdf), banning of Hikvision / Dahua security camera sales applies primarily to...

1. I'm aware of possible actions to minimize external access to our security cameras: e.g., Looking to replace an aging system and what else can i do to secure my network? any advice or tips 2. Ban notice likely in Nov. when FCC prohibits USA certification and thus sale: FCC to Ban...

If your NVR is a Dahau rebrand NVR, then the C500 (Hikvision?) may pose some problems. I have the Amcrest 5MP UltraHD turrets, IP5M-T1179EW, running on Lorex LNR6100 NVR (Dahau) as well as Windows pc running Dahua PC NVR/live view software so u might consider those value cameras if your NVR is...

I use gDMSS (Dahua) app to view my Amcrest 5MP ultraHD IP turret cameras onsite at home with cameras. Also viewing / recording with Dahua PC NVR software on a Windows 10 pc. I view the cameras remotely by logging into the Windows pc using RemotePC remote access software. My daughter didn't...

I had the same "Failed to get.." errors with SmartPSS, ver. 2.02.0000009. Changing port, re-installing, re-allocating hard drive didn't work. Installed SmartPSS, ver. 2.03.0000001 and errors went away, no port change needed, and able to record on Motion as I intended to. Must admit when I...

If you load the gDMSS Plus (for Android) app, under "Me", "General", there's a "Memory Play" switch. It says "When memory play is turned on, he video channel that was played last time will be automatically acquired". When you exit app with your selected cameras on display and then re-enter...

Thanks, Aristobrat. Lux ratings are a good initial gauge. Shame that Hikvision seems to be lagging Dahua in terms of budget low light cameras.

btw, EOP needs to be on the same electrical circuit for it to work. May also interfere with some wifi signals.

Only possible way I can think this can be done (it may even not work though as I don't know if anyone has even tried this): 1) install a Ethernet over Power (EOP) input device on your electrical power line to your camera at the NVR location. NOTE: these devices are typically rated at 10 mbps...

Anyone have any experience with the above Hikvision camera models? Specs. (see Hikvision ECI-T24F4 4 Megapixel Outdoor EXIR Network IR Turret Camera, 4mm Lens) seem to be very similar to highly rated Loryta IPC-T2431T (Dahua) budget cameras. I would get Loryta's but trying to stay with...

I was able to access the camera with unknown password on SADP, VER. 3.0.1.4 downloaded from ipcamtalk. a. tried guessing password but unsuccessful. B. generated the .xml file attached. Can u help in password reset? Never heard back from Hikvision. If I have to go TFTP, where is best...

Thanks, I believe I was able to change the IP address thru the ivms4200 PCNVR software. Will try the SADP password reset; re-guessing the PW. then TFTP.

obviously not a stupid question as it make me feel very stupid. Yes, must click (or check) one of the camera boxes. Feeling very dumb. btw, I did not need to disable my ivms4200 PCNVR for it to work. Thank you Mr. Stevenson for your prompt and revealing response.

btw, this was on pc originally with Windows 7 pro but upgraded to Windows 10 pro. SADP was installed with compatibility set to Windows 7. Did not work either without compatibility set as well.

I wanted to use the "Forgot Password" feature of the updated Hikvision SADP tool. So I deleted my old SADP tool, ver. 1.2.0.5 Build 20140211? Installed SADP 3.0.1.4.win32 but I get the below screen where it shows all my cameras but everything is inactive-- I cannot select anything. I found...

Hi, I may have same problem as you had but am not totally am clear how you solved yours. My situation: 1. Two DS-CD3345 cameras, software version %.4.24, build 170303, DSP version V7.3 build 170119 running on Windows 10 (upgraded from Windows 7 pro) ivms-4200 PC-NVR v2.0.1 build 140122 2. I...

My experience with Fire HD10 (7th generation) after side-loading Google Play: 1. Have 8 Lorex (Hikvision) cams on a LNR380 NVR. Two Hikvision and two Laview (Hikvision) on PC-NVR. 2. Lorex HD Stratus + (recommended by Lorex) locks up although it works (most time but slow) on my Galaxy S7E...

For HD 10, I can load Google Play store without rooting (google it). However, under ivms-4500 HD, I can configure a single camera access my wifi, displays live view of that camera with time ticking away, but app locks up, displaying "..starting live view" and app eventually closes by itself...

I had a chinese 2032 cam. Somehow could not login anymore. Got the "wait" for "20 seconds". Realized my ivms4200 PCNVR was trying incorrect password or at least one the camera no longer wanted to accept. Deleted camera configuration in software. Reset tool worked beautifully although I did...

Th

1. Under "Windows 10', do not use Edge. Click on "windows" logo, "All Apps", "Windows Accessories", Open "Windows Explorer". 2. Click on gear symbol ("tools"), click on "Compatibility View Settings", enter in the IP address of your recorder box (ex., 192.168.0.xxx) and click "Add" button. 3...

I too was trying to get ivms4200 PCNVR to automatically start upon computer start under Windows 7. Tried Task Scheduler changes by myself, Elevated Shortcut. Turns out UACPass worked for me-- Simple to implement changes in Task Scheduler under Win7, 8...

Update: Hikvision tech support said that I would need to install ivms4200 client on each PC desired for remote viewing or playback on local LAN from the PC running 4200 Storage Server. Sort of a pain to do this so I never tested. I had also tested 4200 PCNVR, ver. 1.3.x where I could easily...

Iserver30, what version of 4200 SS/ client are u using? I gave up on 4200 SS/client 2.03.x because I couldn't get live view to work locally on LAN, much less playback. I was able to get live view / playback locally within LAN using 4200 PCNVR, ver. 1.0.x and 1.3.x so I am continuing with...

Jman, yes, cams had HTTP 81 & 82 forwarded. I can see each cam on ivms4500 on my Android without any problem so I know cams are talking to outside world.

1. Running ivms4200, v.2.3.0.4, Storage Server and Client with two HK cameras on Win 8.1 PC. Can live view, record and playback without issue. 2. On my router, have forwarded ports 80 and 8000 on the storage server. 3. On either the host PC or other PCs (Win 7, 32 & 64 bit) on network, I...

Run SADP to confirm Ip of HK camera.

Alastair...Thanks for suggestion. I tried resetting twice ..didn't seem to work at first but now I can get in with default so that must have been problem with 2032.

Who.. thanks for reply. All I did was change static IP to new English FW cam. and added to PCNVR software. I tried deleting new cam. but still got same error message on chinese cams.

1. Ran fine on i3 system, 64 bit Win OS with PCNVR, v1.02.00.03 Cam201: Hikvision 2032, v5.2.5 Cam202: HK 2232, v5.2.0 2. Tried to add Cam203, English HK2232, v5.2.0 Under "Main View", get error code 24 (live view failed, channel unavailable) for all cams. Digging further by direct static IP...