Search results

  1. N

    Changing PCs - Any Advice?

    You don't need any third party ntp server software tho. Just enable ntp server built in to windows, then use BI PC ip address and UDP 123 port for cameras ntp settings. You also need to modify windows firewall settings to get this setup to work, enable incoming and outgoing UDP 123. Ofcourse BI...
  2. N

    OK, now what ?

    Yes
  3. N

    Home alarm output to BlueIris

    I think Blueiris can use something like Arduino as input. Add relay to that wireless socket that switches Arduinos digital IO state and then Arduino sends command to Blueiris? That is just one approach and there might be easier ones?
  4. N

    Push notifications after hours

    It is possible and very easily done. Watch Blue Iris - Working with profilesand Blue Iris - Schedulestutorials.
  5. N

    Adding VPN Router

    It took several days of tinkering and custom firmware to get my old setup up and running, so you need some knowledge about IP ranges, ports, routing and so on. Easiest solution would be to get new main router that has (wireless lan of course) OpenVPN server built in. ASUS routers are quite good...
  6. N

    Adding VPN Router

    I'm pretty sure you can. I had similar setup about year ago. Use your main router as it is and route incoming VPN port traffic to second router which has the VPN server running. To connect to your VPN server you use primary router WAN address.
  7. N

    Which PTZ - best value

    SD49225T-HN is a great option for 340 USD @EMPIRETECANDY.
  8. N

    Dahua DH-SD22204T-GN power question - HELP

    You can power the camera via external 12VDC power supply or with PoE. PoE uses higher voltage (around 48VDC) to lower the current because Cat5e or Cat6 cable is quite thin. To get same power with lower current you just step up the voltage. Active PoE means that PoE supply and the device...
Top