Search results

  1. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Good afternoon, I could finally make it work. First to cut the boot loop I followed these steps: RVi форум I don't know what it does but it worked. Then download this firmware: DAHUA - DESCARGA DE FIRMWARE CORREGIDOS 2018 VIDEOPORTEROS IP Install from VDP the first file and then the language...
  2. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    My VTO is in a boot loop and does not allow me to update any version help!!! "Data CRC Checking ... ERROR" DHBOOT# tftp 0x82000000 update.img; flwrite TFTP from server 192.168.1.1; our IP address is 192.168.1.108 Filename 'update.img'. Load address: 0x82000000 Loading...
  3. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    adjunto imagen
  4. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Yes, my wide monitor did not allow to see the initialize button. I could already start it, now the problem I have is that when I enter via web it does not bring me the page correctly, it is blank. any suggestions ???
  5. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Yes, How is it solved?
  6. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Being with version 1 running halfway, I try to upgrade with the VDP to the version General_VTO2111D_Eng_P_16M_SIP_V4.300.0000000.6.R.20190320, and it is not working, the VDP sees it as the attached image, and I can not enter via web throws me loguin fail
  7. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Dear, well although I could load the firmware (General_VTO2111D_Eng_P_16M_V1.000.0000.0.R.20170414) I could manage the device again, but the fault it generates is that it does not call the cell phone, I tried several Andriod (motorola and samsung) different internet providers and nothing. I...
  8. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Working !!!!! Run line by line from the console and lift perfectly. run dr run dk run du run dw run dp run dc tftp 0x82000000 .FLASHING_DONE_STOP_TFTP_NOW sleep 5 I enclose images in case anyone needs: red cable pin 1 rx from pcb to tx from usb ttl yellow pin 2 tx cable from pcb to usb ttl rx...
  9. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    What are the modules that I should install? sorry so many questions but now that I have console management I would not want to break it
  10. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    DHBOOT# printenv bootcmd=fsload bootdelay=3 baudrate=115200 eth1addr=00:01:5b:00:55:66 eth2addr=00:01:5b:00:77:88 ipaddr=192.168.1.108 serverip=192.168.1.1 netmask=255.255.255.0 bootfile="uImage" dh_keyboard=1 appauto=1 single=0 da=protect off all;tftp 81a00000 dm365_ubl_boot_16M.bin.img;flwrite...
  11. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    DHBOOT# help ? - alias for 'help' askenv - get environment variables from stdin autoscr - run script from memory base - print or set address offset boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootm - boot application image from memory...
  12. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Good afternoon, buy the USB ttl, I already have it connected, and what it throws on the console is: UBL Version: 1.46t(DM365)09:30:17 Sep 2 2014 Oscillator: 24MHZ ARM Rate: 432 MHZ DDR Rate: 340 MHZ BootMode: SPI Starting SPI Memory Copy... DONE U-Boot 1.3.6 (jerry) (Sep 2 2014 -...
  13. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    run dc run dk run dr run du run dw run dd tftp 0x82000000 .FLASHING_DONE_STOP_TFTP_NOW sleep 5
  14. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Thanks for answering, I don't have a TTL cable yet I send you captures of the files and wireshark
  15. Raul Girard

    Dahua IPC EASY unbricking / recovery over TFTP

    Good afternoon, I'm trying to revive a vto2111d-wp. I wanted to update the firmware using Conftool (then I realized that I had to do it through VDP). The update failed and the computer did not start anymore. I read all the forum pages and I can't make it work, Try the Duvel method, TheDude...
Top