Search results

Hi all. Setup: Dahua NVR 5216-16p-4ks2e 6 cams (all directly connected ethernet) - all Dahua Asus router Rt-AX86U 20 port managed switch I would ideally like to set up one or two cams in places I can't reach with ethernet cable (for various reasons). These places would be within my...

Hi guys. Here's the gear I run: Dahua NVR5216-16p-4ks2e Cam's - various Dahua models (all ethernet connected) Cam in question: IPC-B5442T-ASE I can happily log into my NVR's GUI by typing it's address (192.168.50.2) into a browser. Some browsers, such as Firefox, don't work as well. I...

Hi again all and I hope all is well! I've left my NVR/cam's alone for a while to just see if they all work well enough, and so far so good. So next is to sort out remote access - am I correct in saying a VPN setup is the best way to do this? If so, I'm new to VPN's and would love a little...

HI all. Have a look at my dodgy drawing. I've installed a bunch of cams with no issues. This one needs to be mounted on a side wall, but "see" around the corner. I have a matching mounting baseplate PFA130-E, however it will bring the base of the cam (circular plate) off the wall by only...

Hi again all. To start, here’s my setup: NVR - Dahua DHI-NVR5216-16p-4ks2e (2x4TB drives) Cams - I have a range of recent Dahua cam’s: ipc-t5241h-as-pv, 2x ipc-t5442tm-as, etc......(6 in total) The house (including cams) is wired with CAT6. All cam’s connected directly to NVR, then NVR...

Hi gang. My next issue to sort out! First the system for reference: NVR DHI-NVR5216-16p-4ks2e All cameras directly connected via Cat6. All firmware up to date. Using the NVR's GUI via Microsoft Explorer. Altering cam settings via their direct GUI's. Have 3 other Dahua cams without the...

Hi again. I’m not sure why this has started, but one of my cams, when I use the “Search” function to look at overnight triggers, shows a solid red block for the entire night.... NVR DHI-NVR5216-16p-4ks2e Cam in question Ipc-hdw5241h-as-pv I have reset/checked any rules directly via the...

HI all. Another question please! Here's the setup so far: Dahua DHI-NVR5216-16p-4ks2e Cameras so far: 1. IPC-t5241-as-pv 2mp 2.8mm (same as IPC-hdw5241h-as-pv 2. IPC-e3541f-as-m 5mp 2.8mm (same as dh-ipc-hdbw3541f-as-m) 3. IPC-t5442tm-as Now, until yesterday all was going ok. I was...

Hi all. Firstly, thanks for all the help for this here new guy - I'm getting the hang of all this! Now, Here's my kit: Dahua DHI-NVR5216-16p-4ks2e Cameras so far: 1. IPC-t5241-as-pv 2mp 2.8mm (same as IPC-hdw5241h-as-pv 2. IPC-e3541f-as-m 5mp 2.8mm (same as dh-ipc-hdbw3541f-as-m) 3...

Hey all. Starting off, this is my setup (all from Andy, and all with updated firmware): Dahua DHI-NVR5216-16p-4ks2e Cameras so far: 1. IPC-t5241-as-pv 2mp 2.8mm (same as IPC-hdw5241h-as-pv 2. IPC-e3541f-as-m 5mp 2.8mm (same as dh-ipc-hdbw3541f-as-m) 3. IPC-t5442tm-as Anyway, I'm using the...

Hi all. I’ve seen a bunch of threads on this, but they often seem to be rather complex! I’ll summarise my situation: NVR - Dahua nvr5216-16p-4ks2e 6 cams (all Dahua) directly connected via Cat6 to NVR POE ports NVR directly connected to router via Ethernet patch lead NVR currently just...

Hi all. I have a Dahua DHI-NVR5216-16p-4ks2e that I got off the (very helpful) Andy. I have just now upgraded to latest firmware without an issue. From the outset, I noticed that the individual camera login/passwords don't save. That is, I log in via the web GUI, go camera>camera list, tick...