Acti E32A blue iris settings ?

[Total]

Hello good people : I just received 4 - Acti E32A cameras , have been using Blue iris forever but I can't seem to get the program to connect to the cameras . I don't know what port , or what type of axis camera I need to input to blue iris to connect to the camera . I can connect to the camera problem with the web interface . thanks .








problem with the web interface . thanks .

, I'm not sure what camera type to select or what port to

 

[fenderman]

try using generic rtsp from the top of the dropdown and use this as the path..enter 7070 as the rtsp port

/onvif-stream1

 

[Total]

That worked , thanks again .

 

[Total]

Does this look correct , the settings ?

thanks

 

[ruppmeister]

Those settings look right to me, especially if you are getting a picture in BI after hitting OK.

 

[Total]

Thanks for the help people. Another question If I have the program ONVIF running on one monitor and watch the same camera in Blue Iris . The image in Blue iris will freeze for 1 second every 8 seconds , but not in ONVIF . Ideas and thanks