Adding Sony Camera

[golge640]

Hello,
I just got an old SNC-CX600W, and i've done all configurations, connected it to wifi etc. I tried to add it to bi but could't. Then i tried the setting below and got the video stream. But the problem is fps is so low, like 2-3fps. Is there a way to use it properly with blue iris, am im doing something wrong?

 

[TonyR]

Could be the Wi-Fi...can you try with a wired connection?

Also, try "Sony" in the "Make" drop down, select "Sony RTSP" for the model.

If no joy, come back for more ideas.

P.S. - welcome to IPCT !

 

[golge640]

Thank you for reply. I tried the settings you said and tried but no signal unfortunately I don't have a cable right now but wifi might be the problem as you said. Wifi signal shows %50 on camera. And when i try sub stream fps goes up to 10.

 

[TonyR]

Thank you for reply. I tried the settings you said and tried but no signal unfortunately I don't have a cable right now but wifi might be the problem as you said. Wifi signal shows %50 on camera. And when i try sub stream fps goes up to 10.

When you can get onto wired, try the following with VLC; use 2 "/" after "rstp:" (forum software won't let me insert just 2 side-by-side).

rtsp:/Camera-IP:554/media/video1