Android App Won't Connect

[Jrock]

I'm not sure what I'm doing wrong, but for whatever reason I can't seem to get the app on my new phone to connect.

I can input the exact same information in my old phone and it connects right away. Even after deleting all mobile devices in settings, my old phone connects right away, but my new phone won't.

Tried creating a new user/password in settings, but it just won't connect.

I went from a Samsung Note8 to a Note20. I've deleted the app from both phones, reinstalled and still the same outcome.

Any suggestions would be greatly appreciated.

 

[fenderman]

If you’ve entered the wrong username and password too many times the phones IP address has been blocked clear it in the web server advance settings

 

[Jrock]

If you’ve entered the wrong username and password too many times the phones IP address has been blocked clear it in the web server advance settings

I copy/pasted everything from my pw manager. I don't see any ip addresses listed as blocked in advanced or any button to clear blocked ip addresses. Very confused why one phone connects with same info, but not this one.

 

[Jrock]

I got my new phone to connect on the http port, but not the https port. I get all green check marks in remote wizard, uninstalled/reinstalled stunnel, but new phone just won't connect on https port or outside LAN.

EDIT: Now I'm seeing "error:14094417:SSL routines:ssl3_read_bytes:sslv3 alert illegal parameter" in Stunnel log when reloading configuation file and trying to connect. Any help would be appreciated, as this is getting over my head.

 

[fenderman]

I got my new phone to connect on the http port, but not the https port. I get all green check marks in remote wizard, uninstalled/reinstalled stunnel, but new phone just won't connect on https port or outside LAN.

EDIT: Now I'm seeing "error:14094417:SSL routines:ssl3_read_bytes:sslv3 alert illegal parameter" in Stunnel log when reloading configuation file and trying to connect. Any help would be appreciated, as this is getting over my head.

The fact that you are using stunnel should have been mentioned in the first post. There are several threads discussing stunnel issues with new samsung phones.

Blue Iris on new phone

I had Blue Iris working fine with an S7. I upgraded to an S10 and something isn't right. I am running STunnel on the BI PC and have port forwarding set up already. Old phone settings: LAN: HTTPS, 192.168.1.xxx:yyyy WAN:HTTPS, ...:yyyy yyyy is the 4-digit port that I have forwarded. The app on...

ipcamtalk.com

 

[Jrock]

I should have mentioned stunnel, sorry about that. I made the mistake assuming it wasn't the issue since it has been working just fine for a while.

I looked through many other threads with similar errors. I got the error mentioned above, and also WSAECONNREFUSED after editing the stunnel.conf file.

Finally got it working after uninstalling/installing Stunnel, and adding the following in the stunnel.conf

In the section "; * Service defaults may also be specified in individual service sections *" just below ;options = -NO_SSLv3
I added sslVersion = TLSv1.2.

This was one of the first things I tried, but I guess I didn't give it the proper reboot. All is good now. I'm curious though if this is any less secure and if there is another route I should look into? Anyways, thaks for the help.

Ref links that helped and good reading:

What are you using/doing to make your camera more secure?

There are a lot of great threads that talk about securing you camera but some of the step by step instructions that really help the noobs like myself are mixed around. I wanted to make a thread to share my experience with setting up stunnel so it is all in one place. ----- Knowing why you...

ipcamtalk.com

Blue Iris 5 - Stunnel & HTTPS Issues

New user of Blue Iris, just going through all the videos to configure, specifically the stunnel video. Here is my setup: Server - Windows 10 Patched and updated Blue Iris 5 stunnel 5.55 Netgear Orbi router Android - Essential PH1 on Q Configs: Port forward setup to BI Server - Port 8081 to...

ipcamtalk.com

stunnel

So I realized my stunnel had frozen (became non responsive) in the severwl hours I had it running. I wasn't able to login.A restart made it work again (not the service but gui) how stable is it for you guys?

ipcamtalk.com