Anyone have VTO6221E Firmware
- Thread starter Levent
- Start date
riogrande75
Pulling my weight
You can simply get it from dahua's support website: GeneralTO3221E_Eng_P_SIP_Market_V1.000.0000000.6.R.20190130
It's same fw image as for VTO3221D, so everything from here for VTO3221D should be suitable as well: Dahua VTO/VTH firmware link collection
It's same fw image as for VTO3221D, so everything from here for VTO3221D should be suitable as well: Dahua VTO/VTH firmware link collection
The problem with that firmware is that new firmware doesn't have the password manager under Access Control so I can't set two different passwords to open two different doors for this multi apartment one.
riogrande75
Pulling my weight
I don't have a VTO6221E, but did you play with device type in basic settings (villastation,...)?
There's only unit door station and Fence station none of them had the password manager
riogrande75
Pulling my weight
I have the DEE1010A connect to the RS485 A and B port of the VTO, the 2nd strike works it's just that I can only open it from the monitor or if I tell the intercom to only open the 2nd one instead of the 1st with with fobs or codes but there is meant to be a password manager in there for me to add multiple codes and assign each code to a door
riogrande75
Pulling my weight
What FW version are you running on the VTO now?
I'm running the latest one from Dahua GeneralTO3221E_Eng_P_SIP_Market_V1.000.0000000.6.R.20190130
riogrande75
Pulling my weight
I would try V4.4 firmware General_VTO3211D_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019
This one is based on V4.5 and comes with lots of new features. Maybe user management is better with this.
This one is based on V4.5 and comes with lots of new features. Maybe user management is better with this.
Don't go higher than that version! Mine is now in a boot loop when I tryed V4.5
Now I have to get it out of the boot loop and I don't know how....
Version advised by Riogrande is working good and you will have a few more options
Now I have to get it out of the boot loop and I don't know how....
Version advised by Riogrande is working good and you will have a few more options
Last time I remember the ver 4.4 and 4.5 was for the non-apartment style one the vto3221e-p
I put that version on the 6221E, but it also went in a bootloop. The official version from Dahua website is the only thing that is working perfect: GeneralTO3221E_Eng_P_SIP_Market_V1.000.0000000.6.R.20190130. But then I miss the Dutch language....
The version for the 3221 V4.4 DHTO3221E_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019 is also working and than ofcourse more options, BUT the screen is not working anymore. I tryed a lot (resetting, booting, old frimware > newe firmware > reset, etc), but the screen is of...
Is there an option to turn it on somehow?
There is still the option: fence or villa station
Hello, I have VTO6221E-P with only english language. I was update to DH_VTO3221E_Eng_P_SIP_V1.000.0000002.0.R.20210720 but still only english. Is any way to write some multi language firmware with working screen?
When I flash with DHTO3221E_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019 I will lose screen, right?
When I flash with DHTO3221E_MultiLang_PN_SIP_Market_V4.400.0000000.3.R.20191019 I will lose screen, right?
Yes, then the screen is not working anymore.
That is a shame, because the V4.4 has a lot more options. Also with language...
Dahua added new firmware at download section DH_VTOX221E_MultiLang_PN_PAAS_SIP_V4.511.0000001.0.R.211120. Anyone tested?
Don't quote me, I'm pretty sure I tested it last month it offered me the password manager but wouldn't allow me to locate a code to either lock 1 or lock 2 but did allow for multiple codes
Did you test it on the 6221? And if so, was the screen still working?
alincolnC137
n3wb
A little off topic - I have this intercom and I'm powering it off a TP-Link gigabit POE+ switch with 802.3af support (tl-sg105pe). I have it set up as a gate station with a 24m cat5e cable running to the installation point.
I'm having an issue where the intercom goes offline and has issues when it's night time. I suspect it's a power issue when extra power is needed for the lights on the device when it is dark. Anyone know any solutions or poe switches that work?
Much thanks!
I'm having an issue where the intercom goes offline and has issues when it's night time. I suspect it's a power issue when extra power is needed for the lights on the device when it is dark. Anyone know any solutions or poe switches that work?
Much thanks!
Last edited: