Belben 1583A CAT5e cable + TP-link TL-POE150s injector

Discussion in 'Camera Installation Questions' started by wepee, Jun 11, 2019 at 11:03 AM.

Share This Page

  1. wepee

    wepee Young grasshopper

    Joined:
    Jul 16, 2016
    Messages:
    77
    Likes Received:
    11
    Hi there,

    I am just wondering if I have a Belben 1583A CAT5e cable:
    https://catalog.belden.com/techdata/EN/1583A_techdata.pdf
    (This is the only best full copper wire 24AWG available at my place)

    and.............. I am going to use an injector:
    TL-POE150S | PoE Injector | TP-Link

    Will there be any significant signal attenuation, if the cable horizontal length
    is 145 feet + vertical drop is 10 feet (total = 155 feet / approx 47 metres).
    Will the signal strength is so degraded that once the POE camera is connected,
    there is not enough power to turn it on?

    Most appreciated if someone can give some advice with my question.

    Thank you.

    Regards,
    Marcus
     
  2. fenderman

    fenderman Staff Member

    Joined:
    Mar 9, 2014
    Messages:
    30,214
    Likes Received:
    9,338
    No, it has a rated spec of 328 fee and can probably go further.