BI 4.3.3 demo.. with two amcrest 721 cameras, lost video just after trigger.

sdetweil

Young grasshopper
Joined
Sep 7, 2016
Messages
47
Reaction score
1
I am trying to figure out how to close the gap from trigger to video recording..

I set the buffer at 10 seconds, thinking it would then 'save' this with the recording started on trigger. I have trigger delay set to 0.

just trying ot make sure I get as much recorded as possible.. a few seconds sadly might make a difference
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
You need to set pretrigger recording....see help file..
 

sdetweil

Young grasshopper
Joined
Sep 7, 2016
Messages
47
Reaction score
1
thanks.. I already have pre-trigger buffer set to 10 seconds.. the help says it may not be possible without direct to disc recording..
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
You have something set wrong.. Post a screenshot
 

sdetweil

Young grasshopper
Joined
Sep 7, 2016
Messages
47
Reaction score
1
thanks.. I really had to dial the sensitivity up and the detection size (pixels moved) down. then the detection/trigger happened and the pre-trigger buffer was applied. my test was to hide behind a pillar and come out and do something. before I just suddenly appeared holding a book.. now you see me come out from behind the pillar and pick up the book.
 
Top