Blue Iris Jumping to Wrong Monitor

[walkjp1]

I have my Blue Iris running on my computer with 2 monitors. Blue Iris is set to go to the 2nd monitor "connected via DVI". At startup it does fine, since the 2nd monitor is always on. However, this computer is also connected to an audio receiver. "so I can use it as a media player also". If I turn on the receiver "connected HDMI to receiver then to television". The Blue Iris will JUMP to the TV. I then have to manually move it back to the 2nd monitor and resize it. Does anyone know of a way to make BI only display on the 2nd monitor?

Thank You

 

[bob2701]

Put it on a dedicated pc with it’s own monitor.

 

[walkjp1]

Put it on a dedicated pc with it’s own monitor.

That is an obvious, but useless answer. That is not the way I want to do it. I built a pc that can do it all. Just want to make it work correctly.

 

[Dahuacamcctv]

You have to use a program as I believe this feature is not built into windows. See Windows 10: Assigning Application to Specific Desktop

 

[fenderman]

That is an obvious, but useless answer. That is not the way I want to do it. I built a pc that can do it all. Just want to make it work correctly.

Its a windows issue.
And the response what not useless. Blue iris as well as any vms should be run on dedicated hardware. You will ultimately have issues.

 

[walkjp1]

You have to use a program as I believe this feature is not built into windows. See Windows 10: Assigning Application to Specific Desktop

Thank you for this helpful suggestion, will have to look into it.

 

[walkjp1]

Actually, the fix turned out to be simple. I switched the 2nd monitor to primary. And now BI stays there without issues.

Thanks for the help.