blue iris-trigger by switch

monitoring

n3wb
Joined
Apr 16, 2020
Messages
1
Reaction score
0
Location
Germany
hi guys, i'm new here but i have a tricky first question. i want add two cameras to Computer (blue iris is install..). A switch shall both cameras trigger. I connected the pc to a portable data module(Advantech USB-4751L). Everything is set so far except the input output. i don't know what sealevel systems means. I hope someone here can help me there. Best wishes monitoring
 

Attachments

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
hi guys, i'm new here but i have a tricky first question. i want add two cameras to Computer (blue iris is install..). A switch shall both cameras trigger. I connected the pc to a portable data module(Advantech USB-4751L). Everything is set so far except the input output. i don't know what sealevel systems means. I hope someone here can help me there. Best wishes monitoring
LMGTFY
Blue iris will not interface your advantech. You can also use blue iris to trigger a smart switch.
 

Kameraad

Pulling my weight
Joined
Oct 23, 2016
Messages
162
Reaction score
136
You can let BI publish on mqtt when triggered, or trigger a camera in BI through mqtt. If you want to control a sonoff directly you can flash it with firmware called tasmota. You do need to setup a mqtt broker though
 
Top