Configuring BI to Record 10 seconds vs 5 seconds when Camera is Triggered

[byee]

I'd like to change the configuration of BI to record 10 seconds of video when the camera is triggered from the default of 5 seconds?

When I go into the camera properties --> record tab --> video = when triggered

I've changing video to Triggered + continuous each option. This option results in my outdoor cameras to record approximately 8G of video for a 8 hr span.

Anyone know I can increase the default from 5 seconds to 10 seconds?

Thx in advance!

 

[gwminor48]

You don't want the triggered + continuous. Change it back to "when triggered". On the trigger tab in the bottom part under "break time" change end trigger unless re-triggered to 10 seconds.

 

[fenderman]

As noted triggered + continuous is a different function and will screw up your recording. and the default is in fact 10 seconds for break time. You should set it for 30 seconds minimum.

 

[byee]

thank you!

I've made the changes and will check in the morning.