dahua camera IVS schedule missing and IVS not recording

[rado stefano]

So my dahua camera IVS schedule is missing " no orange" and is not recording.
I am receiving emails on event but in playback there are no recordings for events.

 

[DavidDavid]

Do you have a Dahua NVR? If so, make sure the ivs orange is scheduled in the nvr recording schedule.

 

[rado stefano]

Do you have a Dahua NVR? If so, make sure the ivs orange is scheduled in the nvr recording schedule.

I don't have a NVR. This is from the cameras directly.
Do the cameras not record IVS?

 

[fenderman]

Emailing Andy... It is possible the cameras he sales are limited not to record IVS....

huh? they are dahua cameras...there is nothing different in the cameras he sells.

 

[rado stefano]

huh? they are dahua cameras...there is nothing different in the cameras he sells.

So why there is no IVS scheduling and recording on mine?
I spend 4-6 hours reading topics on this forum and another 2 hours trying different configurations.
Do cameras not record IVS on the microsd when there is no NVR/Software used?

 

[DavidDavid]

I wish i could give you a definitive answer, but i have no idea. All i know is that i had to set up the recording part of it in the nvr schedule.

What are you planning on recording your footage to?

 

[TechBill]

The camera does record IVS to local SD card on mine.

What version firmware and if you recently upgraded it, did you restore it back to default?

Is IVS selected and saved under Events -> Smart Plan?

 

[EMPIRETECANDY]

Please check if tick this?

 

[rado stefano]

The camera does record IVS to local SD card on mine.

What version firmware and if you recently upgraded it, did you restore it back to default?

Is IVS selected and saved under Events -> Smart Plan?

DH_IPC-HX5X3X-Rhea_EngSpn_N_Stream3_V2.460.0000.7.R.20170306
this is the firmware I use
Dafault after firmware
Smart plan IVS
The record and snapshot are ticked.

Only general recording works.
If I select IVs or anything else in alarm menu there is no save and the camera forgets the selection.

 

[DavidDavid]

What have you told the camera to record the ivs events to?

 

[rado stefano]

What have you told the camera to record the ivs events to?

I don't have a menu for that.

 

[rado stefano]

What have you told the camera to record the ivs events to?

I tried by selecting alarm IVS and scheduling alarms.
But the alarm menu does not have a save button and does not remember any selection

 

[DavidDavid]

You need something to record to. A Dahua nvr, a blue iris pc, sd card, ect.

Try these two pages of settings?

 

[SquareEyes]

alarm menu

Alarm menu not required.

 

[DavidDavid]

You need something to record to. A Dahua nvr, a blue iris pc, sd card, ect.

Try these two pages of settings?

I take the blue iris pc part back... I don't think ivs works with that. But... It has its own form of advanced motion detection.

 

[xips]

Recording IVS events to µSD on 2 different cams sans NVR with no problems here.

Do you have a Storage -> Schedule -> Record Schedule tab setup?

 

[fenderman]

So why there is no IVS scheduling and recording on mine?
I spend 4-6 hours reading topics on this forum and another 2 hours trying different configurations.
Do cameras not record IVS on the microsd when there is no NVR/Software used?

IVS is disabled when smart codec is used...if there is an issue with ivs it will be an issue with all dahua cameras not just cameras sold by empire...its amazing what folks think of..

 

[rado stefano]

IVS is disabled when smart codec is used...if there is an issue with ivs it will be an issue with all dahua cameras not just cameras sold by empire...its amazing what folks think of..

Smart codec is off . The fact is I have 7 cameras here that do not work the way they are supposed to.

 

[rado stefano]

Recording IVS events to µSD on 2 different cams sans NVR with no problems here.

Do you have a Storage -> Schedule -> Record Schedule tab setup?

Yes.

 

[rado stefano]

You need something to record to. A Dahua nvr, a blue iris pc, sd card, ect.

Try these two pages of settings?

This menu only gives me an option to record on my computer or network.
I only want the recording to happen locally on the camera.
What am I supposed to put here?