dahua sd22204t-gn doesnt upgrade firmware sticks at 50%

[adamfromscotland]

Hi


Does anyone know why i cant upgrade the firmware on my dahua sd22204t-gn

to V2.640.0000000.2


ive tried numerous times on windows 7 and windows 10 on config tool and IE


I did read up and try to change the TCP prt to 3800 but got the " port has been occupieed"

any helps is appreciated and i will update if i get it solved

adam

 

[adamfromscotland]

 

[Oleglevsha]

This indicates that the firmware was loaded into the IP camera's RAM but did not pass the validation check.
Look at the screenshot carefully, there is no Dahua logo.
This indicates that this is the OEM version and a special firmware version is required for the update...

 

[Oleglevsha]

 

[adamfromscotland]

Excellent reply thanks for that, dont know the place where i can get that firmware?

adam

 

[Oleglevsha]

Run this query in the browser, changing the IP address of the camera to your own, so you will know deviceType and updateSerialCloudUpgrade

http://192.168.1.108/cgi-bin/magicBox.cgi?action=getSystemInfo

 

[adamfromscotland]

clicked that link and just get a timeout message

Can’t reach this page

 

[Oleglevsha]

what ip address does your IP camera have?

 

[adamfromscotland]

http://192.168.0.90/

It now says DNS error

im also setting up a PTZ-IR-30

DAHUA 2MP PTZ IR 30 x DH-SD6AEA230FN-HNI and got this working okay

was trying to upgrade both firmware but so hard to find and tried many times

 

[adamfromscotland]

Just a note i had this installed outside and connected to a Dahua NVR and wanted a bigger zoom so bought a BOSCH and guess what the Dahua is better as the Bosch 2mp Ones, colours are not as good and the field of vision is much worse

So want to install it again but with the updated firmware

im also selling a few DAHUA 2MP PTZ IR 30 x DH-SD6AEA230FN-HNI cameras and wanted the new firmware was up to date

 

[Oleglevsha]

http://192.168.0.90/cgi-bin/magicBox.cgi?action=getSystemInfo

 

[adamfromscotland]

Thats link doesnt open ?

Anyone else have any new firmware please?

 

[adamfromscotland]

Hi

does this help?


serialNumber=
deviceType=27
hardwareVersion=
processor=ST7108
appAutoStart=