Dahua VTH1550CH - brick after firmware update?

mcbo

n3wb
Joined
Jan 22, 2018
Messages
2
Reaction score
0
Hello,

Yesterday i flashed the firmware "General_Overseas_VTH1510_Eng_P_SIP_V1.000.00.0.R.20170425.bin" on my "DH-VTH1550CH".

After the successful update process, the VTH is booting to the "Welcome-Message" and than is coming a black screen.

But a ping to the old IP address works fine.


What can I do?


Marcel
 

0blar

Getting the hang of it
Joined
May 17, 2017
Messages
281
Reaction score
34
Try to unpluged and plug the device then check again
 

mcbo

n3wb
Joined
Jan 22, 2018
Messages
2
Reaction score
0
I have restarted the device and the door phone several times.

:nervous:
 

jemesecurise

Young grasshopper
Joined
Jan 27, 2017
Messages
34
Reaction score
11
Location
worldwide
I have restarted the device and the door phone several times.

:nervous:
two solution, try to downgrade with old firmware, or before try to "clean config" with configtool V3.2

if you dont find solution contact me by message
 
Top