Dja
n3wb
- Joined
- Jul 16, 2017
- Messages
- 1
- Reaction score
- 0
Hi All.
I'm trying to unbrick the VTH5221D-S2 after the failed firmware update.
With UART and TFTP I uploaded update.img from General_VTHX421H_MultiLang_SIP_V4.410.0000000.4.R.20200221.zip
But device is still bootlooping
As I see there is an empty HWID value in the printenv command.
So, if anyone has the same indoor monitor, could you help me with HWID please?
I'm trying to unbrick the VTH5221D-S2 after the failed firmware update.
With UART and TFTP I uploaded update.img from General_VTHX421H_MultiLang_SIP_V4.410.0000000.4.R.20200221.zip
But device is still bootlooping
As I see there is an empty HWID value in the printenv command.So, if anyone has the same indoor monitor, could you help me with HWID please?