Dahua VTO2000A with classic doorbell

[TH5]

I would like to connect a classic electrical doorbell to my Dahua VTO2000A doorcamera system.
When the button is pushed on the VTO2000A, the classic doorbel should ring. So I need a NO contact that closes and reopens (like a pushbutton) to ring the bell.
Is this possible ? If so, how do I configure this ?

Thanks in advance for any support !

Bert.

 

[riogrande75]

No, as far as I know this is not possible out-of-the-box.
If you want this, you have to use SIP functionality. This was discussed here as well (german lang. only).

 

[TH5]

Thanks riogrande75 for your clear response.
I downloaded the SIP files (V4.300) from your link and tried to upgrade using VDPconfig. This gives after some time the error message "Failed to start to upgrade".
Also tried to upgrade the MCU with same error as result.
Any idea how I can upgrade to SIP version so I can continue to get my doorbell working ?

Some additional background :
.bin file is on local C drive of my PC
VTO2000A is connected to my network switch, PC is on same switch. I can open the webbrowser of my VTO.
In the webbrowser, I have no "upgrade" menu, even when logged in as admin.
Current version is 2018-06-13 V3.120.0000.0.R

 

[riogrande75]

This would be very OT now.
This kind of issues have been discussed so many times here, pls. read corresponding threads.