I have a Dahua 4108/P NVR home installation with the 3 Dahua turret cameras using PoE.
The new app on the IOS phone kept on dropping out would work once then had to close the app for it to work again.
Updated Firmware on the NVR - App now works.
Problem; 2 cameras disconnected; i change them from private to ONVIF and they work, but the settings are reduced as it wont command the camera's as well. on ONVIF it will connect with admin/admin username and password. on private it doesn't connect...so wrong username and password..but why would they be different? tried all 88888/88888 and 66666/66666 5 and 6 character versions. admin/admin and admin/nimda and admin/no password and then the usual admin/123456 000000 0000 etc. anyone any ideas?
the 3 camera lets me connect on private with admin and the nvr's password.
many thanks in advance...
The new app on the IOS phone kept on dropping out would work once then had to close the app for it to work again.
Updated Firmware on the NVR - App now works.
Problem; 2 cameras disconnected; i change them from private to ONVIF and they work, but the settings are reduced as it wont command the camera's as well. on ONVIF it will connect with admin/admin username and password. on private it doesn't connect...so wrong username and password..but why would they be different? tried all 88888/88888 and 66666/66666 5 and 6 character versions. admin/admin and admin/nimda and admin/no password and then the usual admin/123456 000000 0000 etc. anyone any ideas?
the 3 camera lets me connect on private with admin and the nvr's password.
many thanks in advance...