Diving into the world of ipcams!

kevarti

n3wb
Joined
Aug 9, 2019
Messages
6
Reaction score
2
Location
Syracuse, NY
A month ago after some problems with my immediate neighbor my partner and I decided it was time to get some cameras. I decided to start cheap and get some wyzecams with the rtsp firmware and am now wanting something more stable (stupid wifi!) and higher resolution. I'm now looking at POE cameras (the 8mp 4k bullet from ipcamtalk specifically) and due to the nature of the locations of the cameras and my home network setup instead of a poe switch I think injectors will be the best fit, but i'm not sure what would work with these cameras. Does anyone have any recommendations for one?

Also anyone out there that has this camera (the 8pm 4k bullet from ipcamtalk) can you make a recommendation for a junction box that would fit behind this camera?

Thanks!
 

kevarti

n3wb
Joined
Aug 9, 2019
Messages
6
Reaction score
2
Location
Syracuse, NY
Thank you! I decided to go a slightly different route with cameras (3x IPC-HFW1831E) from Andy, the 2.8mm just seemed to suit my needs better than the 4mm of the ipcamtalk one. Now into the wonderful world of real ip cams I go!
 
Top