DS-2CD2032-I Device Rejected

danoboca

n3wb
Joined
Apr 5, 2016
Messages
3
Reaction score
0
My DS-2CD2032-I stopped working. Cannot connect via browser - refused to connect.
SADP shows HTTP port 0, and now shows DS-2CD-Min-System0120150208CCRR5045 rather than DS-2CD2032-I as the device type.

I have reset it, and the default password seems to work with SADP. Unable to change the HTTP port...

Any suggestions?

Dan
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,930
Reaction score
6,778
Location
Scotland
now shows DS-2CD-Min-System0120150208CCRR5045
That's the 'min-system' recovery mode which is entered when incompatible firmware, or other changes that make it unable to boot normally, have occurred.
It may have been hacked.
Was it accessible over the internet (port forwarding in use?) / what version of firmware was running?
Cannot connect via browser - refused to connect.
In min-system mode there are no web services.

You will be able to recover it with this method :
Unbrick and fully upgrade your R0 / DS-2CD2x32 IP cameras -
R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.
 

danoboca

n3wb
Joined
Apr 5, 2016
Messages
3
Reaction score
0
Thanks for responding. Yes it was port forwarded on the internet.
I was able to do Stage 1 per instructions, got the success message, but the mtd6ro_orig from the camera didn't get transfered to the PC to edit
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,930
Reaction score
6,778
Location
Scotland
but the mtd6ro_orig from the camera didn't get transfered to the PC to edit
Presumably the script gave an error message?
One possible cause could be that the Hikvision tftp updater is still running, not the Jounin tftp server.
The Hikvision tftp updater will load files to the camera, but not from the camera, so after Stage 1 needs to be shut down, and the normal tftp server used instead.
 
Top