DS-2cd2142fwd-i brick

[freshfitz]

Any suggestions I have 3 dome cameras that seem bricked. They boot up, I get an ip but no ports open after an upgrade. They seem to be taking the upgrade but no firmware is working

[192.0.0.64]test tftpserver [2018-12-05 19:36:25] Connect client success
[192.0.0.64]Success [2018-12-05 19:36:25] Start file transmitting[C:\TFTP-Update\TFTP-Update\digicap.dav]
[2018-12-05 19:36:46] Completed file[C:\TFTP-Update\TFTP-Update\digicap.dav] transmit

 

[freshfitz]

I can ping 192.168.1.64

 

[Q™]

Have you tried a hardware reset? Have they all been inadvertently set to the same IP address?

 

[freshfitz]

Of course right after this post it booted up, seems to be ok. I loaded the oldest firmware then the newest and it worked. I've been working on this camera for 2 hrs. I guess I needed to roll back whatever was on there first

Archived Firmware: DS-2x22FWD,2x42FWD_5.3.6_151105
then
Firmware: IPC_EN_STD_5.5.53_180730(2x12FWD 2x22FWD 2x42FWD 2x52F)